[PATCH v2 1/3] wpa_supplicant: src: Remove the word "whitelist"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replace the word "whitelist" with the inclusive word "allowlist"

Signed-off-by: Arowa Suliman <arowa@xxxxxxxxxxxx>
---
 src/common/qca-vendor.h | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index d9eab0212..6e2d51fac 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -4863,14 +4863,14 @@ enum qca_vendor_attr_roam_control {
  *	ignored BSSIDs and accordingly clear the respective ones with the
  *	matching ID.
  *
- * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS: Unsigned
- *	32-bit value.Represents the number of whitelist SSIDs configured.
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALLOW_LIST_SSID_NUM_NETWORKS: Unsigned
+ *	32-bit value.Represents the number of allowlist SSIDs configured.
  *
- * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST: Nested attribute
- *	to carry the list of Whitelist SSIDs.
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALLOW_LIST_SSID_LIST: Nested attribute
+ *	to carry the list of Allowlist SSIDs.
  *
- * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID: SSID (binary attribute,
- *	0..32 octets). Represents the white list SSID. Whitelist SSIDs
+ * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALLOW_LIST_SSID: SSID (binary attribute,
+ *	0..32 octets). Represents the allow list SSID. Allowlist SSIDs
  *	represent the list of SSIDs to which the firmware/driver can consider
  *	to roam to.
  *
@@ -4908,7 +4908,7 @@ enum qca_vendor_attr_roam_control {
  *
  * @QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_SET_LAZY_ROAM_ENABLE: Unsigned 32-bit
  *	value. 1-Enable, 0-Disable. Represents "Lazy" mode, where
- *	firmware is hunting for a better BSSID or white listed SSID even though
+ *	firmware is hunting for a better BSSID or allow listed SSID even though
  *	the RSSI of the link is good. The parameters enabling the roaming are
  *	configured through the PARAM_A_BAND_XX attrbutes.
  *
@@ -4950,7 +4950,7 @@ enum qca_wlan_vendor_attr_roaming_config_params {
 	QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD = 1,
 	QCA_WLAN_VENDOR_ATTR_ROAMING_REQ_ID = 2,
 
-	/* Attributes for wifi_set_ssid_white_list */
+	/* Attributes for wifi_set_ssid_allow_list */
 	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS = 3,
 	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST = 4,
 	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID = 5,
@@ -4992,12 +4992,12 @@ enum qca_wlan_vendor_attr_roaming_config_params {
  * enum qca_wlan_vendor_roaming_subcmd: Referred by
  * QCA_WLAN_VENDOR_ATTR_ROAMING_SUBCMD.
  *
- * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_WHITE_LIST: Sub command to
- *	configure the white list SSIDs. These are configured through
+ * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SSID_ALLOW_LIST: Sub command to
+ *	configure the allow list SSIDs. These are configured through
  *	the following attributes.
- *	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_NUM_NETWORKS,
- *	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID_LIST,
- *	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_WHITE_LIST_SSID
+ *	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALLOW_LIST_SSID_NUM_NETWORKS,
+ *	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALLOW_LIST_SSID_LIST,
+ *	QCA_WLAN_VENDOR_ATTR_ROAMING_PARAM_ALLOW_LIST_SSID
  *
  * @QCA_WLAN_VENDOR_ROAMING_SUBCMD_SET_GSCAN_ROAM_PARAMS: Sub command to
  *	configure the Roam params. These parameters are evaluated on the GScan
-- 
2.34.1.703.g22d0c6ccf7-goog


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux