Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
---
src/drivers/driver_nl80211_event.c | 7 +
src/drivers/nl80211_copy.h | 228 +++++++++++++++++++++++++++--
2 files changed, 225 insertions(+), 10 deletions(-)
diff --git a/src/drivers/driver_nl80211_event.c b/src/drivers/driver_nl80211_event.c
index 0f0a01d01..c920ea382 100644
--- a/src/drivers/driver_nl80211_event.c
+++ b/src/drivers/driver_nl80211_event.c
@@ -172,6 +172,13 @@ static const char * nl80211_command_to_string(enum nl80211_commands cmd)
C2S(NL80211_CMD_UNPROT_BEACON)
C2S(NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS)
C2S(NL80211_CMD_SET_SAR_SPECS)
+ C2S(NL80211_CMD_OBSS_COLOR_COLLISION)
+ C2S(NL80211_CMD_COLOR_CHANGE_REQUEST)
+ C2S(NL80211_CMD_COLOR_CHANGE_STARTED)
+ C2S(NL80211_CMD_COLOR_CHANGE_ABORTED)
+ C2S(NL80211_CMD_COLOR_CHANGE_COMPLETED)
+ C2S(NL80211_CMD_SET_FILS_AAD)
+ C2S(NL80211_CMD_ASSOC_COMEBACK)
C2S(__NL80211_CMD_AFTER_LAST)
}
#undef C2S
diff --git a/src/drivers/nl80211_copy.h b/src/drivers/nl80211_copy.h
index f962c06e9..f1a9d6594 100644
--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -11,7 +11,7 @@
* Copyright 2008 Jouni Malinen <jouni.malinen@xxxxxxxxxxx>
* Copyright 2008 Colin McCabe <colin@xxxxxxxxxxx>
* Copyright 2015-2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -300,6 +300,29 @@
* the interface goes down.
*/
+/**
+ * DOC: FILS shared key crypto offload
+ *
+ * This feature is applicable to drivers running in AP mode.
+ *
+ * FILS shared key crypto offload can be advertised by drivers by setting
+ * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
+ * FILS shared key crypto offload should be able to encrypt and decrypt
+ * association frames for FILS shared key authentication as per IEEE 802.11ai.
+ * With this capability, for FILS key derivation, drivers depend on userspace.
+ *
+ * After FILS key derivation, userspace shares the FILS AAD details with the
+ * driver and the driver stores the same to use in decryption of association
+ * request and in encryption of association response. The below parameters
+ * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
+ * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
+ * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption
+ * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
+ * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
+ *
+ * Once the association is done, the driver cleans the FILS AAD data.
+ */
+
/**
* enum nl80211_commands - supported nl80211 commands
*
@@ -337,7 +360,10 @@
* @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes
* %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from
* userspace to request deletion of a virtual interface, then requires
- * attribute %NL80211_ATTR_IFINDEX.
+ * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are
+ * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS,
+ * and if this command is used for the transmitting interface, then all
+ * the non-transmitting interfaces are deleted as well.
*
* @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified
* by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC.
@@ -1185,6 +1211,32 @@
* passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to
* specify the wiphy index to be applied to.
*
+ * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever
+ * mac80211/drv detects a bss color collision.
+ *
+ * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that
+ * userspace wants to change the BSS color.
+ *
+ * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has
+ * started
+ *
+ * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has
+ * been aborted
+ *
+ * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
+ * has completed
+ *
+ * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
+ * &NL80211_ATTR_MAC - for STA MAC address
+ * &NL80211_ATTR_FILS_KEK - for KEK
+ * &NL80211_ATTR_FILS_NONCES - for FILS Nonces
+ * (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
+ *
+ * @NL80211_CMD_ASSOC_COMEBACK: notification about an association
+ * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC
+ * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to
+ * specify the timeout value.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -1417,6 +1469,18 @@ enum nl80211_commands {
NL80211_CMD_SET_SAR_SPECS,
+ NL80211_CMD_OBSS_COLOR_COLLISION,
+
+ NL80211_CMD_COLOR_CHANGE_REQUEST,
+
+ NL80211_CMD_COLOR_CHANGE_STARTED,
+ NL80211_CMD_COLOR_CHANGE_ABORTED,
+ NL80211_CMD_COLOR_CHANGE_COMPLETED,
+
+ NL80211_CMD_SET_FILS_AAD,
+
+ NL80211_CMD_ASSOC_COMEBACK,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -2413,7 +2477,9 @@ enum nl80211_commands {
* space supports external authentication. This attribute shall be used
* with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
* may offload authentication processing to user space if this capability
- * is indicated in the respective requests from the user space.
+ * is indicated in the respective requests from the user space. (This flag
+ * attribute deprecated for %NL80211_CMD_START_AP, use
+ * %NL80211_ATTR_AP_SETTINGS_FLAGS)
*
* @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this
* u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
@@ -2560,6 +2626,39 @@ enum nl80211_commands {
* disassoc events to indicate that an immediate reconnect to the AP
* is desired.
*
+ * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the
+ * %NL80211_CMD_OBSS_COLOR_COLLISION event.
+ *
+ * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's
+ * until the color switch event.
+ * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are
+ * switching to
+ * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE
+ * information for the time while performing a color switch.
+ *
+ * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID
+ * advertisements (MBSSID) parameters in AP mode.
+ * Kernel uses this attribute to indicate the driver's support for MBSSID
+ * and enhanced multi-BSSID advertisements (EMA AP) to the userspace.
+ * Userspace should use this attribute to configure per interface MBSSID
+ * parameters.
+ * See &enum nl80211_mbssid_config_attributes for details.
+ *
+ * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements.
+ * Mandatory parameter for the transmitting interface to enable MBSSID.
+ * Optional for the non-transmitting interfaces.
+ *
+ * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain
+ * available for radar/CAC detection on some hw. This chain can't be used
+ * to transmit or receive frames and it is bounded to a running wdev.
+ * Background radar/CAC detection allows to avoid the CAC downtime
+ * switching on a different channel during CAC detection on the selected
+ * radar channel.
+ *
+ * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,
+ * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be
+ * used with %NL80211_CMD_START_AP request.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3057,6 +3156,19 @@ enum nl80211_attrs {
NL80211_ATTR_DISABLE_HE,
+ NL80211_ATTR_OBSS_COLOR_BITMAP,
+
+ NL80211_ATTR_COLOR_CHANGE_COUNT,
+ NL80211_ATTR_COLOR_CHANGE_COLOR,
+ NL80211_ATTR_COLOR_CHANGE_ELEMS,
+
+ NL80211_ATTR_MBSSID_CONFIG,
+ NL80211_ATTR_MBSSID_ELEMS,
+
+ NL80211_ATTR_RADAR_BACKGROUND,
+
+ NL80211_ATTR_AP_SETTINGS_FLAGS,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3650,11 +3762,12 @@ enum nl80211_mpath_info {
* capabilities IE
* @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
* defined in HE capabilities IE
- * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
- * defined
* @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
* given for all 6 GHz band channels
+ * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are
+ * advertised on this band/for this iftype (binary)
* @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
*/
enum nl80211_band_iftype_attr {
__NL80211_BAND_IFTYPE_ATTR_INVALID,
@@ -3665,6 +3778,7 @@ enum nl80211_band_iftype_attr {
NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
+ NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
/* keep last */
__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
@@ -4887,6 +5001,7 @@ enum nl80211_txrate_gi {
* @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
* @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
* @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
+ * @NL80211_BAND_LC: light communication band (placeholder)
* @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
* since newer kernel versions may support more bands
*/
@@ -4896,6 +5011,7 @@ enum nl80211_band {
NL80211_BAND_60GHZ,
NL80211_BAND_6GHZ,
NL80211_BAND_S1GHZ,
+ NL80211_BAND_LC,
NUM_NL80211_BANDS,
};
@@ -5462,7 +5578,7 @@ enum nl80211_iface_limit_attrs {
* => allows 8 of AP/GO that can have BI gcd >= min gcd
*
* numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- * => allows two STAs on different channels
+ * => allows two STAs on the same or on different channels
*
* numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
* => allows a STA plus three P2P interfaces
@@ -5644,13 +5760,15 @@ enum nl80211_tdls_operation {
NL80211_TDLS_DISABLE_LINK,
};
-/*
+/**
* enum nl80211_ap_sme_features - device-integrated AP features
- * Reserved for future use, no bits are defined in
- * NL80211_ATTR_DEVICE_AP_SME yet.
+ * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver
+ * when user space indicates support for SA Query procedures offload during
+ * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT.
+ */
enum nl80211_ap_sme_features {
+ NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0,
};
- */
/**
* enum nl80211_feature_flags - device/driver features
@@ -5950,6 +6068,17 @@ enum nl80211_feature_flags {
* frame protection for all management frames exchanged during the
* negotiation and range measurement procedure.
*
+ * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
+ * detection and change announcemnts.
+ *
+ * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
+ * FILS encryption and decryption for (Re)Association Request and Response
+ * frames. Userspace has to share FILS AAD details to the driver by using
+ * @NL80211_CMD_SET_FILS_AAD.
+ *
+ * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC
+ * detection.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -6014,6 +6143,9 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_SECURE_LTF,
NL80211_EXT_FEATURE_SECURE_RTT,
NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
+ NL80211_EXT_FEATURE_BSS_COLOR,
+ NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
+ NL80211_EXT_FEATURE_RADAR_BACKGROUND,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -6912,6 +7044,9 @@ enum nl80211_peer_measurement_ftm_capa {
* @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only
* valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or
* %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set.
+ * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the
+ * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED
+ * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set.
*
* @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
* @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
@@ -6931,6 +7066,7 @@ enum nl80211_peer_measurement_ftm_req {
NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK,
+ NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR,
/* keep last */
NUM_NL80211_PMSR_FTM_REQ_ATTR,
@@ -7299,4 +7435,76 @@ enum nl80211_sar_specs_attrs {
NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1,
};
+/**
+ * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced
+ * multi-BSSID advertisements (EMA) in AP mode.
+ * Kernel uses some of these attributes to advertise driver's support for
+ * MBSSID and EMA.
+ * Remaining attributes should be used by the userspace to configure the
+ * features.
+ *
+ * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise
+ * the maximum number of MBSSID interfaces supported by the driver.
+ * Driver should indicate MBSSID support by setting
+ * wiphy->mbssid_max_interfaces to a value more than or equal to 2.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
+ * to advertise the maximum profile periodicity supported by the driver
+ * if EMA is enabled. Driver should indicate EMA support to the userspace
+ * by setting wiphy->ema_max_profile_periodicity to
+ * a non-zero value.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
+ * this BSS (u8) in the multiple BSSID set.
+ * Value must be set to 0 for the transmitting interface and non-zero for
+ * all non-transmitting interfaces. The userspace will be responsible
+ * for using unique indices for the interfaces.
+ * Range: 0 to wiphy->mbssid_max_interfaces-1.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for
+ * a non-transmitted profile which provides the interface index (u32) of
+ * the transmitted profile. The value must match one of the interface
+ * indices advertised by the kernel. Optional if the interface being set up
+ * is the transmitting one, however, if provided then the value must match
+ * the interface index of the same.
+ *
+ * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
+ * Setting this flag is permitted only if the driver advertises EMA support
+ * by setting wiphy->ema_max_profile_periodicity to non-zero.
+ *
+ * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
+ * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
+ */
+enum nl80211_mbssid_config_attributes {
+ __NL80211_MBSSID_CONFIG_ATTR_INVALID,
+
+ NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES,
+ NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY,
+ NL80211_MBSSID_CONFIG_ATTR_INDEX,
+ NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX,
+ NL80211_MBSSID_CONFIG_ATTR_EMA,
+
+ /* keep last */
+ __NL80211_MBSSID_CONFIG_ATTR_LAST,
+ NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1,
+};
+
+/**
+ * enum nl80211_ap_settings_flags - AP settings flags
+ *
+ * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external
+ * authentication.
+ * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query
+ * procedures offload to driver. If driver advertises
+ * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall
+ * ignore SA Query procedures and validations when this flag is set by
+ * userspace.
+ */
+enum nl80211_ap_settings_flags {
+ NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0,
+ NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1,
+};
+
#endif /* __LINUX_NL80211_H */
--
2.33.1
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
