Hi All,
What's the importance/use of status code in initial confirm message from the client. Do we need to check for status code == success in confirm message from the client.
Spec does not talk about status code in initial confirm message. It mentions: An SAE Confirm message, with a status code not equal to SUCCESS, shall indicate that a peer rejects a previously sent SAE Confirm message. An SAE Confirm message that was not successfully verified is indicated with a status code of CHALLENGE_FAILURE.
} else if (auth_transaction == 2) {
hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
HOSTAPD_LEVEL_DEBUG,
"SAE authentication (RX confirm, status=%u (%s))",
status_code, status2str(status_code));
if (status_code != WLAN_STATUS_SUCCESS)
goto remove_sta;
-Raghu
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
