Replaced the word dummy with the inclusive word Stub.
Signed-off-by: Arowa Suliman <arowa@xxxxxxxxxxxx>
---
doc/code_structure.doxygen | 2 +-
hostapd/ctrl_iface.c | 10 ++--
hostapd/hlr_auc_gw.milenage_db | 2 +-
hostapd/hostapd_cli.c | 2 +-
src/eap_server/eap_tls_common.h | 2 +-
src/wps/wps.c | 2 +-
src/wps/wps_defs.h | 2 +-
src/wps/wps_registrar.c | 26 +++++-----
src/wps/wps_upnp.c | 2 +-
tests/hwsim/auth_serv/hlr_auc_gw.milenage_db | 2 +-
tests/hwsim/multi-bss-iface-per_sta_vif.conf | 4 +-
tests/hwsim/multi-bss-iface.conf | 4 +-
tests/hwsim/test_ap_vlan.py | 54 ++++++++++----------
tests/hwsim/test_ap_wps.py | 16 +++---
tests/hwsim/test_p2p_autogo.py | 2 +-
tests/hwsim/vm/inside.sh | 2 +-
tests/hwsim/vm/kernel-config | 2 +-
tests/hwsim/vm/kernel-config.uml | 2 +-
wpa_supplicant/config_none.c | 2 +-
wpa_supplicant/ctrl_iface.c | 10 ++--
wpa_supplicant/preauth_test.c | 6 +--
21 files changed, 78 insertions(+), 78 deletions(-)
diff --git a/doc/code_structure.doxygen b/doc/code_structure.doxygen
index ff11506fa..c7ed5c71a 100644
--- a/doc/code_structure.doxygen
+++ b/doc/code_structure.doxygen
@@ -130,7 +130,7 @@ with with hostapd. The following C files are currently used:
Definition of TLS library wrapper
\ref tls_none.c
- Dummy implementation of TLS library wrapper for cases where TLS
+ Stub implementation of TLS library wrapper for cases where TLS
functionality is not included.
\ref tls_openssl.c
diff --git a/hostapd/ctrl_iface.c b/hostapd/ctrl_iface.c
index 4a2d60627..280e94fec 100644
--- a/hostapd/ctrl_iface.c
+++ b/hostapd/ctrl_iface.c
@@ -1455,10 +1455,10 @@ static int hostapd_ctrl_iface_set(struct hostapd_data *hapd, char *cmd)
wps_version_number & 0x0f);
hostapd_wps_update_ie(hapd);
}
- } else if (os_strcasecmp(cmd, "wps_testing_dummy_cred") == 0) {
- wps_testing_dummy_cred = atoi(value);
- wpa_printf(MSG_DEBUG, "WPS: Testing - dummy_cred=%d",
- wps_testing_dummy_cred);
+ } else if (os_strcasecmp(cmd, "wps_testing_stub_cred") == 0) {
+ wps_testing_stub_cred = atoi(value);
+ wpa_printf(MSG_DEBUG, "WPS: Testing - stub_cred=%d",
+ wps_testing_stub_cred);
} else if (os_strcasecmp(cmd, "wps_corrupt_pkhash") == 0) {
wps_corrupt_pkhash = atoi(value);
wpa_printf(MSG_DEBUG, "WPS: Testing - wps_corrupt_pkhash=%d",
@@ -4470,7 +4470,7 @@ static void hostapd_ctrl_iface_flush(struct hapd_interfaces *interfaces)
{
#ifdef CONFIG_WPS_TESTING
wps_version_number = 0x20;
- wps_testing_dummy_cred = 0;
+ wps_testing_stub_cred = 0;
wps_corrupt_pkhash = 0;
#endif /* CONFIG_WPS_TESTING */
diff --git a/hostapd/hlr_auc_gw.milenage_db b/hostapd/hlr_auc_gw.milenage_db
index c156a29ae..a25065310 100644
--- a/hostapd/hlr_auc_gw.milenage_db
+++ b/hostapd/hlr_auc_gw.milenage_db
@@ -3,7 +3,7 @@
# 4.3.20 Test Set 20. SQN is the last used SQN value.
# These values can be used for both UMTS (EAP-AKA) and GSM (EAP-SIM)
# authentication. In case of GSM/EAP-SIM, AMF and SQN values are not used, but
-# dummy values will need to be included in this file.
+# stub values will need to be included in this file.
# IMSI Ki OPc AMF SQN [RES_len]
232010000000000 90dca4eda45b53cf0f12d7c9c3bc6a89 cb9cccc4b9258e6dca4760379fb82581 61df 000000000000
diff --git a/hostapd/hostapd_cli.c b/hostapd/hostapd_cli.c
index eaa628ad0..0e7fdd6bc 100644
--- a/hostapd/hostapd_cli.c
+++ b/hostapd/hostapd_cli.c
@@ -1048,7 +1048,7 @@ static char ** hostapd_complete_set(const char *str, int pos)
int arg = get_cmd_arg_num(str, pos);
const char *fields[] = {
#ifdef CONFIG_WPS_TESTING
- "wps_version_number", "wps_testing_dummy_cred",
+ "wps_version_number", "wps_testing_stub_cred",
"wps_corrupt_pkhash",
#endif /* CONFIG_WPS_TESTING */
#ifdef CONFIG_INTERWORKING
diff --git a/src/eap_server/eap_tls_common.h b/src/eap_server/eap_tls_common.h
index b0b736123..b0723a1fa 100644
--- a/src/eap_server/eap_tls_common.h
+++ b/src/eap_server/eap_tls_common.h
@@ -68,7 +68,7 @@ struct eap_ssl_data {
/* could be up to 128 bytes, but only the first 64 bytes are used */
#define EAP_TLS_KEY_LEN 64
-/* dummy type used as a flag for UNAUTH-TLS */
+/* stub type used as a flag for UNAUTH-TLS */
#define EAP_UNAUTH_TLS_TYPE 255
#define EAP_WFA_UNAUTH_TLS_TYPE 254
diff --git a/src/wps/wps.c b/src/wps/wps.c
index 484df262c..1fe38063b 100644
--- a/src/wps/wps.c
+++ b/src/wps/wps.c
@@ -17,7 +17,7 @@
#ifdef CONFIG_WPS_TESTING
int wps_version_number = 0x20;
-int wps_testing_dummy_cred = 0;
+int wps_testing_stub_cred = 0;
int wps_corrupt_pkhash = 0;
int wps_force_auth_types_in_use = 0;
u16 wps_force_auth_types = 0;
diff --git a/src/wps/wps_defs.h b/src/wps/wps_defs.h
index 9fccb4eeb..ddaeda56d 100644
--- a/src/wps/wps_defs.h
+++ b/src/wps/wps_defs.h
@@ -12,7 +12,7 @@
#ifdef CONFIG_WPS_TESTING
extern int wps_version_number;
-extern int wps_testing_dummy_cred;
+extern int wps_testing_stub_cred;
extern int wps_corrupt_pkhash;
extern int wps_force_auth_types_in_use;
extern u16 wps_force_auth_types;
diff --git a/src/wps/wps_registrar.c b/src/wps/wps_registrar.c
index 173fbbd68..9587293d0 100644
--- a/src/wps/wps_registrar.c
+++ b/src/wps/wps_registrar.c
@@ -1785,23 +1785,23 @@ int wps_build_cred(struct wps_data *wps, struct wpabuf *msg)
use_provided:
#ifdef CONFIG_WPS_TESTING
- if (wps_testing_dummy_cred)
+ if (wps_testing_stub_cred)
cred = wpabuf_alloc(200);
else
cred = NULL;
if (cred) {
- struct wps_credential dummy;
- wpa_printf(MSG_DEBUG, "WPS: Add dummy credential");
- os_memset(&dummy, 0, sizeof(dummy));
- os_memcpy(dummy.ssid, "dummy", 5);
- dummy.ssid_len = 5;
- dummy.auth_type = WPS_AUTH_WPA2PSK;
- dummy.encr_type = WPS_ENCR_AES;
- os_memcpy(dummy.key, "dummy psk", 9);
- dummy.key_len = 9;
- os_memcpy(dummy.mac_addr, wps->mac_addr_e, ETH_ALEN);
- wps_build_credential(cred, &dummy);
- wpa_hexdump_buf(MSG_DEBUG, "WPS: Dummy Credential", cred);
+ struct wps_credential stub;
+ wpa_printf(MSG_DEBUG, "WPS: Add stub credential");
+ os_memset(&stub, 0, sizeof(stub));
+ os_memcpy(stub.ssid, "stub", 5);
+ stub.ssid_len = 5;
+ stub.auth_type = WPS_AUTH_WPA2PSK;
+ stub.encr_type = WPS_ENCR_AES;
+ os_memcpy(stub.key, "stub psk", 9);
+ stub.key_len = 9;
+ os_memcpy(stub.mac_addr, wps->mac_addr_e, ETH_ALEN);
+ wps_build_credential(cred, &stub);
+ wpa_hexdump_buf(MSG_DEBUG, "WPS: Stub Credential", cred);
wpabuf_put_be16(msg, ATTR_CRED);
wpabuf_put_be16(msg, wpabuf_len(cred));
diff --git a/src/wps/wps_upnp.c b/src/wps/wps_upnp.c
index ff58cb938..05bb9c585 100644
--- a/src/wps/wps_upnp.c
+++ b/src/wps/wps_upnp.c
@@ -658,7 +658,7 @@ static int subscription_first_event(struct subscription *s)
/*
* There has been no events before the subscription. However,
* UPnP device architecture specification requires all the
- * evented variables to be included, so generate a dummy event
+ * evented variables to be included, so generate a stub event
* for this particular case using a WSC_ACK and all-zeros
* nonces. The ER (UPnP control point) will ignore this, but at
* least it will learn that WLANEvent variable will be used in
diff --git a/tests/hwsim/auth_serv/hlr_auc_gw.milenage_db b/tests/hwsim/auth_serv/hlr_auc_gw.milenage_db
index 1c494f773..fefe5145f 100644
--- a/tests/hwsim/auth_serv/hlr_auc_gw.milenage_db
+++ b/tests/hwsim/auth_serv/hlr_auc_gw.milenage_db
@@ -3,7 +3,7 @@
# 4.3.20 Test Set 20. SQN is the last used SQN value.
# These values can be used for both UMTS (EAP-AKA) and GSM (EAP-SIM)
# authentication. In case of GSM/EAP-SIM, AMF and SQN values are not used, but
-# dummy values will need to be included in this file.
+# stub values will need to be included in this file.
# IMSI Ki OPc AMF SQN
232010000000000 90dca4eda45b53cf0f12d7c9c3bc6a89 cb9cccc4b9258e6dca4760379fb82581 61df 000000000000
diff --git a/tests/hwsim/multi-bss-iface-per_sta_vif.conf b/tests/hwsim/multi-bss-iface-per_sta_vif.conf
index f07c13b21..874cb0771 100644
--- a/tests/hwsim/multi-bss-iface-per_sta_vif.conf
+++ b/tests/hwsim/multi-bss-iface-per_sta_vif.conf
@@ -9,7 +9,7 @@ ctrl_interface=/var/run/hostapd
ssid=bss-1
dynamic_vlan=1
-vlan_tagged_interface=dummy0
+vlan_tagged_interface=stub0
vlan_bridge=brvlan
wpa=2
wpa_key_mgmt=WPA-EAP
@@ -28,7 +28,7 @@ ctrl_interface=/var/run/hostapd
ssid=bss-2
dynamic_vlan=1
-vlan_tagged_interface=dummy0
+vlan_tagged_interface=stub0
vlan_bridge=brvlan
wpa=2
wpa_key_mgmt=WPA-EAP
diff --git a/tests/hwsim/multi-bss-iface.conf b/tests/hwsim/multi-bss-iface.conf
index 6b6167f51..5370352c9 100644
--- a/tests/hwsim/multi-bss-iface.conf
+++ b/tests/hwsim/multi-bss-iface.conf
@@ -9,7 +9,7 @@ ctrl_interface=/var/run/hostapd
ssid=bss-1
dynamic_vlan=1
-vlan_tagged_interface=dummy0
+vlan_tagged_interface=stub0
vlan_bridge=brvlan
wpa=2
wpa_key_mgmt=WPA-EAP
@@ -27,7 +27,7 @@ ctrl_interface=/var/run/hostapd
ssid=bss-2
dynamic_vlan=1
-vlan_tagged_interface=dummy0
+vlan_tagged_interface=stub0
vlan_bridge=brvlan
wpa=2
wpa_key_mgmt=WPA-EAP
diff --git a/tests/hwsim/test_ap_vlan.py b/tests/hwsim/test_ap_vlan.py
index 29f8f5322..ef0e9fd7f 100644
--- a/tests/hwsim/test_ap_vlan.py
+++ b/tests/hwsim/test_ap_vlan.py
@@ -378,41 +378,41 @@ def test_ap_vlan_tagged(dev, apdev):
os.unlink(filename)
def ap_vlan_iface_cleanup_multibss_cleanup():
- subprocess.call(['ifconfig', 'dummy0', 'down'],
+ subprocess.call(['ifconfig', 'stub0', 'down'],
stderr=open('/dev/null', 'w'))
- ifnames = ['wlan3.1', 'wlan3.2', 'wlan3-2.1', 'wlan3-2.2', 'dummy0.2',
- 'dummy0.1', 'dummy0', 'brvlan1', 'brvlan2']
+ ifnames = ['wlan3.1', 'wlan3.2', 'wlan3-2.1', 'wlan3-2.2', 'stub0.2',
+ 'stub0.1', 'stub0', 'brvlan1', 'brvlan2']
for ifname in ifnames:
subprocess.call(['ip', 'link', 'del', ifname],
stderr=open('/dev/null', 'w'))
def ap_vlan_iface_test_and_prepare_environ():
ifaces = netifaces.interfaces()
- if "dummy0" in ifaces:
- raise Exception("dummy0 already exists before")
+ if "stub0" in ifaces:
+ raise Exception("stub0 already exists before")
ifaces = netifaces.interfaces()
- if "dummy0.1" in ifaces:
- raise Exception("dummy0.1 already exists before")
+ if "stub0.1" in ifaces:
+ raise Exception("stub0.1 already exists before")
- subprocess.call(['ip', 'link', 'add', 'dummy0', 'type', 'dummy'])
- subprocess.call(['ifconfig', 'dummy0', 'up'])
+ subprocess.call(['ip', 'link', 'add', 'stub0', 'type', 'stub'])
+ subprocess.call(['ifconfig', 'stub0', 'up'])
ifaces = netifaces.interfaces()
- if "dummy0" not in ifaces:
- raise HwsimSkip("failed to add dummy0 - missing kernel config DUMMY ?")
+ if "stub0" not in ifaces:
+ raise HwsimSkip("failed to add stub0 - missing kernel config DUMMY ?")
- subprocess.call(['ip', 'link', 'add', 'link', 'dummy0', 'name', 'dummy0.1',
+ subprocess.call(['ip', 'link', 'add', 'link', 'stub0', 'name', 'stub0.1',
'type', 'vlan', 'id', '1'])
ifaces = netifaces.interfaces()
- if "dummy0.1" not in ifaces:
- raise HwsimSkip("failed to add dummy0.1 - missing kernel config VLAN_8021Q ?")
+ if "stub0.1" not in ifaces:
+ raise HwsimSkip("failed to add stub0.1 - missing kernel config VLAN_8021Q ?")
- subprocess.call(['ip', 'link', 'del', 'dummy0.1'])
+ subprocess.call(['ip', 'link', 'del', 'stub0.1'])
ifaces = netifaces.interfaces()
- if "dummy0.1" in ifaces:
- raise Exception("dummy0.1 was not removed before testing")
+ if "stub0.1" in ifaces:
+ raise Exception("stub0.1 was not removed before testing")
def test_ap_vlan_iface_cleanup_multibss(dev, apdev):
"""AP VLAN operation in multi-BSS multi-VLAN case"""
@@ -464,8 +464,8 @@ def ap_vlan_iface_cleanup_multibss(dev, apdev, cfgfile):
raise Exception("bridge brvlan1 was not created")
hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan1")
- if not iface_is_in_bridge("brvlan1", "dummy0.1"):
- raise Exception("dummy0.1 not in brvlan1")
+ if not iface_is_in_bridge("brvlan1", "stub0.1"):
+ raise Exception("stub0.1 not in brvlan1")
dev[1].connect("bss-2", key_mgmt="WPA-EAP", eap="PAX",
identity="vlan1",
@@ -474,8 +474,8 @@ def ap_vlan_iface_cleanup_multibss(dev, apdev, cfgfile):
hapd1.wait_sta()
hwsim_utils.test_connectivity_iface(dev[1], hapd1, "brvlan1")
- if not iface_is_in_bridge("brvlan1", "dummy0.1"):
- raise Exception("dummy0.1 not in brvlan1")
+ if not iface_is_in_bridge("brvlan1", "stub0.1"):
+ raise Exception("stub0.1 not in brvlan1")
authserv.disable()
authserv.set('eap_user_file', "auth_serv/eap_user_vlan.conf")
@@ -502,13 +502,13 @@ def ap_vlan_iface_cleanup_multibss(dev, apdev, cfgfile):
hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan2",
max_tries=5)
- if not iface_is_in_bridge("brvlan2", "dummy0.2"):
- raise Exception("dummy0.2 not in brvlan2")
+ if not iface_is_in_bridge("brvlan2", "stub0.2"):
+ raise Exception("stub0.2 not in brvlan2")
logger.info("test wlan1 == VLAN 1")
hwsim_utils.test_connectivity_iface(dev[1], hapd1, "brvlan1")
- if not iface_is_in_bridge("brvlan1", "dummy0.1"):
- raise Exception("dummy0.1 not in brvlan1")
+ if not iface_is_in_bridge("brvlan1", "stub0.1"):
+ raise Exception("stub0.1 not in brvlan1")
logger.info("wlan1 -> VLAN 2")
@@ -530,8 +530,8 @@ def ap_vlan_iface_cleanup_multibss(dev, apdev, cfgfile):
logger.info("test wlan0 == VLAN 2")
hwsim_utils.test_connectivity_iface(dev[0], hapd, "brvlan2")
- if not iface_is_in_bridge("brvlan2", "dummy0.2"):
- raise Exception("dummy0.2 not in brvlan2")
+ if not iface_is_in_bridge("brvlan2", "stub0.2"):
+ raise Exception("stub0.2 not in brvlan2")
ifaces = netifaces.interfaces()
if "brvlan1" in ifaces:
diff --git a/tests/hwsim/test_ap_wps.py b/tests/hwsim/test_ap_wps.py
index a07ed60b8..d784af8df 100644
--- a/tests/hwsim/test_ap_wps.py
+++ b/tests/hwsim/test_ap_wps.py
@@ -5066,14 +5066,14 @@ def _test_ap_wps_http_timeout(dev, apdev):
sock.connect(addr)
sock.send(b"G")
- class DummyServer(StreamRequestHandler):
+ class StubServer(StreamRequestHandler):
def handle(self):
- logger.debug("DummyServer - start 31 sec wait")
+ logger.debug("StubServer - start 31 sec wait")
time.sleep(31)
- logger.debug("DummyServer - wait done")
+ logger.debug("StubServer - wait done")
logger.debug("Start WPS ER")
- server, sock2 = wps_er_start(dev[0], DummyServer, max_age=40,
+ server, sock2 = wps_er_start(dev[0], StubServer, max_age=40,
wait_m_search=True)
logger.debug("Start server to accept, but not complete, HTTP connection from WPS ER")
@@ -10131,8 +10131,8 @@ def test_ap_wps_tkip(dev, apdev):
if "FAIL" not in hapd.request("WPS_PBC"):
raise Exception("WPS unexpectedly enabled")
-def test_ap_wps_conf_dummy_cred(dev, apdev):
- """WPS PIN provisioning with configured AP using dummy cred"""
+def test_ap_wps_conf_stub_cred(dev, apdev):
+ """WPS PIN provisioning with configured AP using stub cred"""
ssid = "test-wps-conf"
hapd = hostapd.add_ap(apdev[0],
{"ssid": ssid, "eap_server": "1", "wps_state": "2",
@@ -10142,7 +10142,7 @@ def test_ap_wps_conf_dummy_cred(dev, apdev):
dev[0].scan_for_bss(apdev[0]['bssid'], freq="2412")
dev[0].dump_monitor()
try:
- hapd.set("wps_testing_dummy_cred", "1")
+ hapd.set("wps_testing_stub_cred", "1")
dev[0].request("WPS_PIN " + apdev[0]['bssid'] + " 12345670")
for i in range(1, 3):
ev = dev[0].wait_event(["WPS-CRED-RECEIVED"], timeout=15)
@@ -10150,7 +10150,7 @@ def test_ap_wps_conf_dummy_cred(dev, apdev):
raise Exception("WPS credential %d not received" % i)
dev[0].wait_connected(timeout=30)
finally:
- hapd.set("wps_testing_dummy_cred", "0")
+ hapd.set("wps_testing_stub_cred", "0")
def test_ap_wps_rf_bands(dev, apdev):
"""WPS and wps_rf_bands configuration"""
diff --git a/tests/hwsim/test_p2p_autogo.py b/tests/hwsim/test_p2p_autogo.py
index 91d68eaf2..d857c9025 100644
--- a/tests/hwsim/test_p2p_autogo.py
+++ b/tests/hwsim/test_p2p_autogo.py
@@ -378,7 +378,7 @@ def test_autogo_chan_switch_group_iface(dev):
@remote_compatible
def test_autogo_extra_cred(dev):
"""P2P autonomous GO sending two WPS credentials"""
- if "FAIL" in dev[0].request("SET wps_testing_dummy_cred 1"):
+ if "FAIL" in dev[0].request("SET wps_testing_stub_cred 1"):
raise Exception("Failed to enable test mode")
autogo(dev[0], freq=2412)
connect_cli(dev[0], dev[1], social=True, freq=2412)
diff --git a/tests/hwsim/vm/inside.sh b/tests/hwsim/vm/inside.sh
index 9d4a933fe..8ba7ce43d 100755
--- a/tests/hwsim/vm/inside.sh
+++ b/tests/hwsim/vm/inside.sh
@@ -53,7 +53,7 @@ ln -s /proc/self/fd/2 /dev/stderr
echo "VM has started up" > /dev/ttyS0
-# create dummy sudo - everything runs as uid 0
+# create stub sudo - everything runs as uid 0
mkdir /tmp/bin
cat > /tmp/bin/sudo << EOF
#!/bin/bash
diff --git a/tests/hwsim/vm/kernel-config b/tests/hwsim/vm/kernel-config
index 2aff20af4..ec3d3a8aa 100644
--- a/tests/hwsim/vm/kernel-config
+++ b/tests/hwsim/vm/kernel-config
@@ -98,7 +98,7 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PNP_DEBUG_MESSAGES is not set
# CONFIG_BLK_DEV is not set
CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
+CONFIG_STUB=y
CONFIG_MACSEC=y
CONFIG_VETH=y
# CONFIG_ETHERNET is not set
diff --git a/tests/hwsim/vm/kernel-config.uml b/tests/hwsim/vm/kernel-config.uml
index b0f2f65ac..f6de9c4d4 100644
--- a/tests/hwsim/vm/kernel-config.uml
+++ b/tests/hwsim/vm/kernel-config.uml
@@ -84,7 +84,7 @@ CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_UBD=y
CONFIG_BLK_DEV_LOOP=y
-CONFIG_DUMMY=y
+CONFIG_STUB=y
CONFIG_MACSEC=y
CONFIG_VETH=y
# CONFIG_ETHERNET is not set
diff --git a/wpa_supplicant/config_none.c b/wpa_supplicant/config_none.c
index 2aac28fa3..0bc977e39 100644
--- a/wpa_supplicant/config_none.c
+++ b/wpa_supplicant/config_none.c
@@ -5,7 +5,7 @@
* This software may be distributed under the terms of the BSD license.
* See README for more details.
*
- * This file implements dummy example of a configuration backend. None of the
+ * This file implements stub example of a configuration backend. None of the
* functions are actually implemented so this can be used as a simple
* compilation test or a starting point for a new configuration backend.
*/
diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
index 2b3243e5a..f4a6c0afd 100644
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
@@ -568,10 +568,10 @@ static int wpa_supplicant_ctrl_iface_set(struct wpa_supplicant *wpa_s,
(wps_version_number & 0xf0) >> 4,
wps_version_number & 0x0f);
}
- } else if (os_strcasecmp(cmd, "wps_testing_dummy_cred") == 0) {
- wps_testing_dummy_cred = atoi(value);
- wpa_printf(MSG_DEBUG, "WPS: Testing - dummy_cred=%d",
- wps_testing_dummy_cred);
+ } else if (os_strcasecmp(cmd, "wps_testing_stub_cred") == 0) {
+ wps_testing_stub_cred = atoi(value);
+ wpa_printf(MSG_DEBUG, "WPS: Testing - stub_cred=%d",
+ wps_testing_stub_cred);
} else if (os_strcasecmp(cmd, "wps_corrupt_pkhash") == 0) {
wps_corrupt_pkhash = atoi(value);
wpa_printf(MSG_DEBUG, "WPS: Testing - wps_corrupt_pkhash=%d",
@@ -8428,7 +8428,7 @@ static void wpa_supplicant_ctrl_iface_flush(struct wpa_supplicant *wpa_s)
#ifdef CONFIG_WPS_TESTING
wps_version_number = 0x20;
- wps_testing_dummy_cred = 0;
+ wps_testing_stub_cred = 0;
wps_corrupt_pkhash = 0;
wps_force_auth_types_in_use = 0;
wps_force_encr_types_in_use = 0;
diff --git a/wpa_supplicant/preauth_test.c b/wpa_supplicant/preauth_test.c
index 97c16fb80..31b55325f 100644
--- a/wpa_supplicant/preauth_test.c
+++ b/wpa_supplicant/preauth_test.c
@@ -220,7 +220,7 @@ static void eapol_test_poll(void *eloop_ctx, void *timeout_ctx)
}
-static struct wpa_driver_ops dummy_driver;
+static struct wpa_driver_ops stub_driver;
static void wpa_init_conf(struct wpa_supplicant *wpa_s, const char *ifname)
@@ -228,8 +228,8 @@ static void wpa_init_conf(struct wpa_supplicant *wpa_s, const char *ifname)
struct l2_packet_data *l2;
struct wpa_sm_ctx *ctx;
- os_memset(&dummy_driver, 0, sizeof(dummy_driver));
- wpa_s->driver = &dummy_driver;
+ os_memset(&stub_driver, 0, sizeof(stub_driver));
+ wpa_s->driver = &stub_driver;
ctx = os_zalloc(sizeof(*ctx));
assert(ctx != NULL);
--
2.32.0.93.g670b81a890-goog
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
