[PATCH v2 5/7] doc: src: Replace Master with Main.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Replaced the words Master with the inclusive word Main.

Signed-off-by: Arowa Suliman <arowa@xxxxxxxxxxxx>
---
 doc/doxygen.conf            | 2 +-
 src/common/qca-vendor.h     | 4 ++--
 src/drivers/driver_hostap.h | 4 ++--
 src/p2p/p2p.h               | 2 +-
 src/utils/pcsc_funcs.c      | 4 ++--
 5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/doc/doxygen.conf b/doc/doxygen.conf
index 3f0117393..b283b74ba 100644
--- a/doc/doxygen.conf
+++ b/doc/doxygen.conf
@@ -883,7 +883,7 @@ HHC_LOCATION           =
 
 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
 # controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
+# it should be included in the main .chm file (NO).
 
 GENERATE_CHI           = NO
 
diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index ce588cc00..28ee871ca 100644
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -551,10 +551,10 @@ enum qca_radiotap_vendor_ids {
  *	sent in the event.
  * @QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG: This sub command is used to
  *	improve the success rate of Zigbee joining network.
- *	Due to PTA master limitation, Zigbee joining network success rate is
+ *	Due to PTA main limitation, Zigbee joining network success rate is
  *	low while WLAN is working. The WLAN driver needs to configure some
  *	parameters including Zigbee state and specific WLAN periods to enhance
- *	PTA master. All these parameters are delivered by the attributes
+ *	PTA main. All these parameters are delivered by the attributes
  *	defined in enum qca_mpta_helper_vendor_attr.
  * @QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING: This sub command is used to
  *	implement Beacon frame reporting feature.
diff --git a/src/drivers/driver_hostap.h b/src/drivers/driver_hostap.h
index 4c1e6d69f..ab3d92ca5 100644
--- a/src/drivers/driver_hostap.h
+++ b/src/drivers/driver_hostap.h
@@ -55,8 +55,8 @@ enum {
 	PRISM2_PARAM_MONITOR_ALLOW_FCSERR = 16,
 	PRISM2_PARAM_HOST_ENCRYPT = 17,
 	PRISM2_PARAM_HOST_DECRYPT = 18,
-	PRISM2_PARAM_BUS_MASTER_THRESHOLD_RX = 19,
-	PRISM2_PARAM_BUS_MASTER_THRESHOLD_TX = 20,
+	PRISM2_PARAM_BUS_MAIN_THRESHOLD_RX = 19,
+	PRISM2_PARAM_BUS_MAIN_THRESHOLD_TX = 20,
 	PRISM2_PARAM_HOST_ROAMING = 21,
 	PRISM2_PARAM_BCRX_STA_KEY = 22,
 	PRISM2_PARAM_IEEE_802_1X = 23,
diff --git a/src/p2p/p2p.h b/src/p2p/p2p.h
index f606fbb14..af13b28bd 100644
--- a/src/p2p/p2p.h
+++ b/src/p2p/p2p.h
@@ -486,7 +486,7 @@ struct p2p_config {
 	 * case for this is to include passive-scan channels on devices that may
 	 * not know their current location and have configured most channels to
 	 * not allow initiation of radition (i.e., another device needs to take
-	 * master responsibilities).
+	 * main responsibilities).
 	 */
 	struct p2p_channels cli_channels;
 
diff --git a/src/utils/pcsc_funcs.c b/src/utils/pcsc_funcs.c
index 383ed3ddf..ba3924d06 100644
--- a/src/utils/pcsc_funcs.c
+++ b/src/utils/pcsc_funcs.c
@@ -90,9 +90,9 @@
 
 /* GSM files
  * File type in first octet:
- * 3F = Master File
+ * 3F = Main File
  * 7F = Dedicated File
- * 2F = Elementary File under the Master File
+ * 2F = Elementary File under the Main File
  * 6F = Elementary File under a Dedicated File
  */
 #define SCARD_FILE_MF		0x3F00
-- 
2.32.0.93.g670b81a890-goog


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux