Hi All, I am running latest hostapd in H2E only mode using following hostapd.conf. …. sae_pwe=1 sae_groups=19 sae_password=example secret Latest Wpa_supplicant is not connecting to H2E only mode AP, if I use wpa_supplicant.conf with only “sae_password=example secret” Wpa_supplicant throws: 1615416250.587683: wlp5s0: Selecting BSS from priority group 0 1615416250.587690: wlp5s0: 0: f8:a2:d6:bc:d0:51 ssid='raghu-test-h2e' wpa_ie_len=0 rsn_ie_len=20 caps=0x411 level=-39 freq=2437 1615416250.587700: wlp5s0: selected based on RSN IE 1615416250.587704: wlp5s0: SAE H2E disabled 1615416250.587708: wlp5s0: skip - rate sets do not match If I use password identifier then it works. Following config works. Hostapd.conf: sae_password=example secret|id=pw identifier wpa_supplicant.conf: sae_password="example secret" sae_password_id="pw identifier" Is there a way to test wpa_supplicant and hostapd without using pwd identifier? -Raghu _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
