On Wed, Mar 03, 2021 at 09:53:33AM +0000, Michal Kazior wrote: > When I was testing dpp_auth_init on an AP with > Enrollee on a different channel from the AP I was > getting failures. This happened on hwsim in UML > with time-travel for me. I don't recall seeing > this with real devices, presumably because of lax > offchan implementation. Is this with a hwsim test case that already exists in hostap.git? Does it fail every time in your test setup? > The AP reported the following logs (grepped): > > > 1614762426.860212: RX_ACTION category 4 action 10 sa 02:00:00:00:01:00 da 02:00:00:00:00:00 len 227 freq 2412 > > 1614762426.860212: wlan0: GAS: GAS Initial Request from 02:00:00:00:01:00 (dialog token 239) > > 1614762426.860233: DPP: Wait for Configuration Result > > 1614762426.860234: nl80211: Send Action frame (ifindex=5, freq=2462 MHz wait=0 ms no_cck=0 offchanok=0) > > 1614762428.861186: DPP: Timeout while waiting for Configuration Result > > 1614762428.861186: wlan0: DPP-CONF-FAILED Can you please share the full debug log for this? I'd like to understand what exactly happened with the channel negotiation here. > I'm not sure if this is the right thing to do. And > there seems to be more cases where APs freq is > used instead of the GAS req freq that could > potentially be updated. There's at least the GAS > comeback case I don't handle here. This as-is does > help with my hwsim test though. > > On one hand it seems perhaps the Enrollee should > try to do GAS on the APs channel. But is it well > equiped/informed to do so? I'm not familiar with > the spec that much. DPP configuration exchange (GAS) is supposed to happen on the same channel on which the last frame of DPP authentication exchange happened. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
