Mandi! Dennis Bland In chel di` si favelave... > Note that the AX200 only supports 2.4 GHz in AP mode, as it does not > have radar detection for the 5 GHz band. OK. > In hostapd.conf, are you setting "hw_mode=g"? My current board is a: Jan 23 19:38:20 ino kernel: [ 8.357496] ath: EEPROM regdomain: 0x809c Jan 23 19:38:20 ino kernel: [ 8.357497] ath: EEPROM indicates we should expect a country code Jan 23 19:38:20 ino kernel: [ 8.357497] ath: doing EEPROM country->regdmn map search Jan 23 19:38:20 ino kernel: [ 8.357498] ath: country maps to regdmn code: 0x52 Jan 23 19:38:20 ino kernel: [ 8.357499] ath: Country alpha2 being used: CN Jan 23 19:38:20 ino kernel: [ 8.357500] ath: Regpair used: 0x52 Jan 23 19:38:20 ino kernel: [ 8.359450] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Jan 23 19:38:20 ino kernel: [ 8.360504] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffbf658d4f0000, irq=16 Jan 23 19:38:20 ino kernel: [ 8.362587] ath9k 0000:10:00.0 wls1: renamed from wlan0 and hostapd conf: interface=wls1 bridge=vmbr0 driver=nl80211 logger_syslog=-1 logger_syslog_level=2 logger_stdout=-1 logger_stdout_level=2 ctrl_interface=/var/run/hostapd ctrl_interface_group=0 ssid=LilliputBBS country_code=IT ieee80211d=1 hw_mode=g channel=0 beacon_int=100 dtim_period=2 max_num_sta=255 rts_threshold=-1 fragm_threshold=-1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wmm_enabled=1 wmm_ac_bk_cwmin=4 wmm_ac_bk_cwmax=10 wmm_ac_bk_aifs=7 wmm_ac_bk_txop_limit=0 wmm_ac_bk_acm=0 wmm_ac_be_aifs=3 wmm_ac_be_cwmin=4 wmm_ac_be_cwmax=10 wmm_ac_be_txop_limit=0 wmm_ac_be_acm=0 wmm_ac_vi_aifs=2 wmm_ac_vi_cwmin=3 wmm_ac_vi_cwmax=4 wmm_ac_vi_txop_limit=94 wmm_ac_vi_acm=0 wmm_ac_vo_aifs=2 wmm_ac_vo_cwmin=2 wmm_ac_vo_cwmax=3 wmm_ac_vo_txop_limit=47 wmm_ac_vo_acm=0 ieee80211n=1 ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1][DSSS_CCK-40] eapol_key_index_workaround=0 eap_server=0 own_ip_addr=127.0.0.1 wpa=1 wpa_psk_file=/etc/hostapd/wpa_psk wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP GCMP > What is the actual error message that causes hostapd to exit? No eeror at all. Even systemd say that hostapd is up and running, while it is simply 'dead'. I've not 'straced' it, indeed... Thanks. -- Marco ``Gaio'' Gaiarin | Pordenone Linux User Group (https://www.pnlug.it/) P.zza S. Tommaso, 20 | Lilliput BBS (http://bbs.lilliput.linux.it) Cimpello di Fiume Veneto | Azione Cattolica - Concordia-Pordenone 33080 Pordenone (Italia) | (https://www.acconcordiapn.it/) Tel. +39-0434-56-1305 | Mastodon:@marcogaio@sociale.network gaio@xxxxxxxx _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
