> Are there any flags that enable 802.11k and v features > in the wpa_supplicant config file? Not directly. You would need to extend "disable_btm" in the wpa_suppliant code to be configurable from wpa_cli and/or the wpa_supplicant.conf file. Having said that, when you include CONFIG_WNM in the build config, 802.11v BSS Transition Management is enabled in the supplicant by default. When wpa_supplicant starts up, it queries the driver capabilities and will only enable 802.11k or 802.11v if the appropriate support is available from the driver. I am not sure if the ath9k ever supported 802.11k/v (it is supported in ath10k). > The purpose is to enable roaming of a client between > different APs with the same SSID using 802.11k and v. > The wifi client driver is ath9k and the underlying OS is Linux. > Both support the protocols. WPA_supplicant version is 2.8. > WPA_supplicant was compiled with CONFIG_WNM flag. > CONFIG_MBO is not enabled. > > Neighbor report and BSS transition are enabled on the AP side, > the beacon frames confirm that. > However the wifi client's association and probe requests > captured on wireshark do not have BSS transition enabled. > So, I want to make sure that wpa_supplicant and client are set > up correctly to request neighbor frames on Linux. > > Any input is really appreciated. > Please let me know if you need any additional information. > > > Regards, > DB. > _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
