On 17/10/2020 16:19, Felix Rubio wrote: > Hi everybody, > > I am facing the following situation: I have bridged the my wireless and ethernet nics, also enabled ipv4 forwarding, and I am running hostapd with the following configuration. I can reach from the host running hostapd the computers on the wireless segment, but I cannot do so from any other computer on the network. Firewall is off. Does anybody know if I have something wrong in my setup? > > interface=wlan0 > driver=nl80211 > ssid=myssid > wpa_passphrase=mypassword > wpa_key_mgmt=WPA-PSK > rsn_pairwise=CCMP > country_code=FR > hw_mode=g > channel=10 > wpa=2 > auth_algs=1 > ieee80211d=1 > ieee80211n=1 > require_ht=1 > wmm_enabled=1 > vht_oper_chwidth=1 > ht_capab=[SHORT-GI-40][HT40+][HT40-][DSSS_CCK-40] > > Thank you very much, > Felix You need to add bridge=br0 to the hostapd configuration. _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
