[RESEND PATCH 02/10] mesh: update ssid->frequency as pri/sec channel switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peter Oh <peter.oh@xxxxxxxxxxxxxxxxx>

ssid->frequency is one of variables used to gets channel
number from given frequency. Leave it as unchanged when
pri/sec channel switched will cause picking up wrong
channel number after applying secondary channel offset
for HT40 and leads failing interface bring-up.

Signed-off-by: Peter Oh <peter.oh@xxxxxxxxxxxxxxxxx>
---
 wpa_supplicant/mesh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
index 1453bdc01..778541bc0 100644
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
@@ -299,6 +299,7 @@ static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
 	    frequency == freq->freq + freq->sec_channel_offset * 20) {
 		wpa_printf(MSG_DEBUG, "mesh: pri/sec channels switched");
 		frequency = freq->freq;
+		ssid->frequency = frequency;
 	}
 	wpa_s->assoc_freq = frequency;
 	wpa_s->current_ssid = ssid;
-- 
2.27.0


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux