Re: AP Isolate Has No Effect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2020-06-14 13:10, Hooman wrote:
I have created a WiFi hotspot using Ubuntu 20.04. Under the hood it uses
wpa_supplicant to create the AP. I'm trying to enable client isolation,
so that devices on the hotspot network cannot send packets to each
other. So once the hotspot is set up, I do the following:

#sudo wpa_cli -i wlan0

set ap_isolate 1
OK
get ap_isolate
1

So I see that AP isolate is enabled. However, I still can send packets
from one device to another on the hotspot network. Why is that? Am I
missing something?

Are the AP and STA interfaces on a bridge with hairpinning enabled?

--
thomas

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux