Re: Cannot connecting to a pure WPA3-SAE access point

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 17, 2020 at 12:07 PM Dennis Bland <dennis@xxxxxxxxxxxxxxxxx> wrote:
>
> I have seen issues with some chipset drivers where PMF needs to be set
> to optional (ieee80211w=1), even when in SAE mode.  This is especially
> true when the AP is configured to support simultaneous mixed mode
> (WPA2/SAE).  What version of wpa_supplicant is running on your laptop?

I tried changing the value to 1 but got the same error.  The laptop
runs wpa_supplicant v2.9 as does the Pi4.  You can see the Arch
package (config and so forth) here:
https://git.archlinux.org/svntogit/packages.git/tree/trunk?h=packages/wpa_supplicant

Note that Raspbian buster is using v2.8-dev of wpa_supplicant and
throws the same errors.

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux