Hi,
This was my mistake. Found wrongly commented driver:
#driver=wired
Should be
driver=wired
Working config:
# cat /etc/hostapd.conf | grep ^[^#]
interface=eth0
driver=wired
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ieee8021x=1
eapol_version=2
eapol_key_index_workaround=0
eap_reauth_period=3600
own_ip_addr=192.168.200.236
auth_server_addr=192.168.200.120
auth_server_port=1812
auth_server_shared_secret=*secret*
Results in
# hostapd /etc/hostapd.conf -dd
random: Trying to read entropy from /dev/random
Configuration file: /etc/hostapd.conf
ctrl_interface_group=0
eapol_version=2
Opening raw packet socket for ifindex 2
BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
Using existing control interface directory.
ctrl_iface bind(PF_UNIX) failed: Address already in use
ctrl_iface exists, but does not allow connections - assuming it was
leftover from forced program termination
Successfully replaced leftover ctrl_iface socket '/var/run/hostapd/eth0'
eth0: IEEE 802.11 Fetching hardware channel/rate support not supported.
Completing interface initialization
hostapd_setup_bss(hapd=0xdb220 (eth0), first=1)
eth0: Flushing old station entries
eth0: Deauthenticate all stations
Using interface eth0 with hwaddr 00:30:d6:18:45:86 and ssid ""
eth0: RADIUS Authentication server 192.168.200.120:1812
RADIUS local address: 192.168.200.236:46904
eth0: interface state UNINITIALIZED->ENABLED
eth0: AP-ENABLED
eth0: Setup of interface done.
ctrl_iface not configured!
random: Got 20/20 bytes from /dev/random
Thanks,
Erwin
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
