You will get these configuration errors when CONFIG_NO_RADIUS is enabled as a compile-time option in your .config file. To avoid these errors, comment out the setting as shown below, and recompile hostapd. #CONFIG_NO_RADIUS=y On Wed, Apr 22, 2020 at 11:14 AM <erwin@xxxxxxxxxx> wrote: > > Hi, > > I want to configure hostapd as an AP to authenticate via wired interface > STA(tions) against a freeradius server. > > This is my config > > # cat /etc/hostapd.conf | grep ^[^#] > interface=eth0 > logger_syslog=-1 > logger_syslog_level=2 > logger_stdout=-1 > logger_stdout_level=2 > ctrl_interface=/var/run/hostapd > ctrl_interface_group=0 > ieee8021x=1 > eapol_version=2 > eapol_key_index_workaround=0 > eap_reauth_period=3600 > own_ip_addr=192.168.200.236 > auth_server_addr=192.168.200.120 > auth_server_port=1812 > auth_server_shared_secret=*secret* > > Which results in errors > > # hostapd /etc/hostapd.conf > Configuration file: /etc/hostapd.conf > Line 1057: unknown configuration item 'auth_server_addr' > Line 1058: unknown configuration item 'auth_server_port' > Line 1059: unknown configuration item 'auth_server_shared_secret' > Invalid IEEE 802.1X configuration (no EAP authenticator configured). > 4 errors found in configuration file '/etc/hostapd.conf' > Failed to set up interface with /etc/hostapd.conf > Failed to initialize interface > > Why? > > How and where in the config can I set the right EAP authenticator? > > Thanks, > Erwin > > > > _______________________________________________ > Hostap mailing list > Hostap@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/hostap _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
