On Sat, Apr 11, 2020 at 12:25:16PM +0200, Markus Theil wrote: > This patch series adds rx control port support over nl80211. Control port > over nl80211 delivers all EAPOL userspace. > > Nl80211 control port for AP mode is included, but disabled, as currently no > tx status support for control port frames is included in the kernel. > > Wpa_supplicant now uses control port rx over nl80211 for both > EAPOL frames. pre-auth frame rx is disabled. > wpa_supplicant connects noticeably faster in my tests with this patch series > applied. Thanks, applied with changes along the lines pointed out in the other comments in this thread. This seems to be working nicely for both TX and RX and for both STA and AP modes. TX/RX capability can now be selected independently and automatically with the exception of AP mode TX which I changed to be disabled by default based on the missing TX status reporting. That said, I did do this in a manner that allows overriding with control_port_ap=1 driver param so that all combinations can be tested in hwsim test cases to avoid breaking something accidentally (and to also allow that to be used for other purposes, if there are cases where control port TX is more valuable than the retransmission optimizations from TX status. Anyway, it would be nice to get TX status support added for the control port TX so that there would be no remaining missing capabilities compared to the previously used packet socket approach. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
