On Sun, Mar 29, 2020 at 05:52:52PM +0000, Schmidt, Wystan W wrote: > Unfortunately, the debug output with -dd is not much help in this case. See below: > > RX ctrl_iface - hexdump_ascii(len=20): > 44 50 50 5f 43 4f 4e 46 49 47 55 52 41 54 4f 52 DPP_CONFIGURATOR > 5f 41 44 44 _ADD > DPP: Generating a keypair > RX ctrl_iface - hexdump_ascii(len=48): > 44 50 50 5f 43 4f 4e 46 49 47 55 52 41 54 4f 52 DPP_CONFIGURATOR > 5f 53 49 47 4e 20 63 6f 6e 66 3d 61 70 2d 64 70 _SIGN conf=ap-dp > 70 20 63 6f 6e 66 69 67 75 72 61 74 6f 72 3d 31 p configurator=1 > DPP: Set configurator parameters: conf=ap-dpp configurator=1 > wlan1: DPP: Failed to set configurator parameters > CTRL_IFACE monitor send /tmp/wpa_ctrl_3137-77\x00 > > Are you able to recreate the desired output using the current snapshot with the configuration file from README-DPP? I am, but I also now realized what's going on here after going through the parsing function line by line.. I use a testing build (CONFIG_TESTING_OPTIONS=y) which has a workaround for some old test cases that depended on the behavior for the initial Configurator implementation that had a hardcoded default SSID value. That is not valid for normal use and the SSID needs to be specified. README-DPP has clearly not been updated to take that into account with this dpp_configurator_sign case while it was addressed for dpp_auth_init. The correct command to use here is this: dpp_configurator_sign conf=<ap-dpp|sta-dpp> configurator=<configurator-id> ssid=<SSID hexdump> For example: > dpp_configurator_add 1> dpp_configurator_sign conf=ap-dpp configurator=1 ssid=74657374 <3>DPP-CONF-RECEIVED ... OK -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
