On Mon, Jan 13, 2020 at 03:58:31PM +0100, Markus Theil wrote: > This patch series adds rx control port support over nl80211. Control port > over nl80211 delivers all EAPOL and PREAUTH frames to userspace. This conflicts > with the current hostapd handling of pre-auth frames. Therefore, this feature > gets disabled for hostapd. Furthermore a pending kernel patch is necessary to > forward pre-auth frames from userspace (otherwise handled by Linux bridge code). Can you please clarify why the special control port would be used for RSN preauthentication frames? Those frame are supposed to be normal Data frames than can be sent out only when fully associated. Why would they need any special processing? And is it clear that that special processing would not result in incorrect behavior somewhere? It should be noted that these frame are _not_ supposed to be going over the EAPOL controlled port as defined in IEEE 802.1X (only EAPOL frames should). -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
