On Tue, Jun 25, 2019 at 05:02:37PM -0700, Blair Burtan wrote: > If I set p2p_listen to a fairly large number e.g. 600, I'm no longer > able to get anything back from a wpa_cli scan. Furthermore, if it's > set high, then I can longer connect to a router automatically. P2P_LISTEN is a request to force the radio to exclusively listen for P2P operations, so this is expected behavior.. P2P listen mode cannot really be used concurrently with anything else that might need the radio to be available on another channel (e.g., a scan). > So far, it appears that I need to have p2p_listen set very high in > order to keep a P2P GO SSID broadcasting. There's some sort of > conflict here. Any insight would be appreciated. Huh.. P2P_LISTEN has nothing to do with GO beaconing (if that is what you mean with "P2P GO SSID broadcasting"). That should happen automatically and if you need P2P_LISTEN to somehow fix beaconing, it sounds like there is something wrong with the driver you are using here or something else in the way you are trying to use P2P. P2P_LISTEN should never be used at all with a radio that is operating as a P2P GO. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
