New versions of wpa_supplicant and hostapd were just released and are now available from https://w1.fi/ This release follows the v2.x style with the release being made directly from the master branch and the master branch moving now to 2.9 development. There has been continued enhancements to the automated testing with mac80211_hwsim since the last release. The current code coverage from the full test run of 3156 (up from 2955) test cases is 85.5% (up from 85.2% line coverage as reported by lcov from the vm-run.sh --codecov). There has been quite a few new features and fixes since the 2.7 release. The following ChangeLog entries highlight some of the main changes: hostapd: * SAE changes - added support for SAE Password Identifier - changed default configuration to enable only group 19 (i.e., disable groups 20, 21, 25, 26 from default configuration) and disable all unsuitable groups completely based on REVmd changes - improved anti-clogging token mechanism and SAE authentication frame processing during heavy CPU load; this mitigates some issues with potential DoS attacks trying to flood an AP with large number of SAE messages - added Finite Cyclic Group field in status code 77 responses - reject use of unsuitable groups based on new implementation guidance in REVmd (allow only FFC groups with prime >= 3072 bits and ECC groups with prime >= 256) - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-1/] (CVE-2019-9494) - fixed confirm message validation in error cases [https://w1.fi/security/2019-3/] (CVE-2019-9496) * EAP-pwd changes - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-2/] (CVE-2019-9495) - verify peer scalar/element [https://w1.fi/security/2019-4/] (CVE-2019-9497 and CVE-2019-9498) - fix message reassembly issue with unexpected fragment [https://w1.fi/security/2019-5/] - enforce rand,mask generation rules more strictly - fix a memory leak in PWE derivation - disallow ECC groups with a prime under 256 bits (groups 25, 26, and 27) * Hotspot 2.0 changes - added support for release number 3 - reject release 2 or newer association without PMF * added support for RSN operating channel validation (CONFIG_OCV=y and configuration parameter ocv=1) * added Multi-AP protocol support * added FTM responder configuration * fixed build with LibreSSL * added FT/RRB workaround for short Ethernet frame padding * fixed KEK2 derivation for FILS+FT * added RSSI-based association rejection from OCE * extended beacon reporting functionality * VLAN changes - allow local VLAN management with remote RADIUS authentication - add WPA/WPA2 passphrase/PSK -based VLAN assignment * OpenSSL: allow systemwide policies to be overridden * extended PEAP to derive EMSK to enable use with ERP/FILS * extended WPS to allow SAE configuration to be added automatically for PSK (wps_cred_add_sae=1) * fixed FT and SA Query Action frame with AP-MLME-in-driver cases * OWE: allow Diffie-Hellman Parameter element to be included with DPP in preparation for DPP protocol extension * RADIUS server: started to accept ERP keyName-NAI as user identity automatically without matching EAP database entry * fixed PTK rekeying with FILS and FT wpa_supplicant: * SAE changes - added support for SAE Password Identifier - changed default configuration to enable only groups 19, 20, 21 (i.e., disable groups 25 and 26) and disable all unsuitable groups completely based on REVmd changes - do not regenerate PWE unnecessarily when the AP uses the anti-clogging token mechanisms - fixed some association cases where both SAE and FT-SAE were enabled on both the station and the selected AP - started to prefer FT-SAE over SAE AKM if both are enabled - started to prefer FT-SAE over FT-PSK if both are enabled - fixed FT-SAE when SAE PMKSA caching is used - reject use of unsuitable groups based on new implementation guidance in REVmd (allow only FFC groups with prime >= 3072 bits and ECC groups with prime >= 256) - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-1/] (CVE-2019-9494) * EAP-pwd changes - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-2/] (CVE-2019-9495) - verify server scalar/element [https://w1.fi/security/2019-4/] (CVE-2019-9499) - fix message reassembly issue with unexpected fragment [https://w1.fi/security/2019-5/] - enforce rand,mask generation rules more strictly - fix a memory leak in PWE derivation - disallow ECC groups with a prime under 256 bits (groups 25, 26, and 27) * fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y * Hotspot 2.0 changes - do not indicate release number that is higher than the one AP supports - added support for release number 3 - enable PMF automatically for network profiles created from credentials * fixed OWE network profile saving * fixed DPP network profile saving * added support for RSN operating channel validation (CONFIG_OCV=y and network profile parameter ocv=1) * added Multi-AP backhaul STA support * fixed build with LibreSSL * number of MKA/MACsec fixes and extensions * extended domain_match and domain_suffix_match to allow list of values * fixed dNSName matching in domain_match and domain_suffix_match when using wolfSSL * started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both are enabled * extended nl80211 Connect and external authentication to support SAE, FT-SAE, FT-EAP-SHA384 * fixed KEK2 derivation for FILS+FT * extended client_cert file to allow loading of a chain of PEM encoded certificates * extended beacon reporting functionality * extended D-Bus interface with number of new properties * fixed a regression in FT-over-DS with mac80211-based drivers * OpenSSL: allow systemwide policies to be overridden * extended driver flags indication for separate 802.1X and PSK 4-way handshake offload capability * added support for random P2P Device/Interface Address use * extended PEAP to derive EMSK to enable use with ERP/FILS * extended WPS to allow SAE configuration to be added automatically for PSK (wps_cred_add_sae=1) * removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS) * extended domain_match and domain_suffix_match to allow list of values * added a RSN workaround for misbehaving PMF APs that advertise IGTK/BIP KeyID using incorrect byte order * fixed PTK rekeying with FILS and FT git-shortlog for 2.7 -> 2.8: There were 833 commits, so the list would be a too long for this email. Anyway, if you are interested in the details, they are available in the hostap.git repository. diffstat has following to say about the changes: 504 files changed, 38871 insertions(+), 20780 deletions(-) -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
