Enable FTM responder and configure LCI and civic if ftm_responder
configuration option is set.
Since ftm_responder configuration existed before and was used to set
extended capability bits, don't fail AP setup flow if ftm_responder is
set, but the driver doesn't advertise FTM responder support.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@xxxxxxxxx>
---
src/ap/beacon.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/src/ap/beacon.c b/src/ap/beacon.c
index 59bd4af395..ef30bbec47 100644
--- a/src/ap/beacon.c
+++ b/src/ap/beacon.c
@@ -1357,6 +1357,18 @@ int ieee802_11_build_ap_params(struct hostapd_data *hapd,
#endif /* CONFIG_HS20 */
params->multicast_to_unicast = hapd->conf->multicast_to_unicast;
params->pbss = hapd->conf->pbss;
+
+ if (hapd->conf->ftm_responder) {
+ if (hapd->iface->drv_flags & WPA_DRIVER_FLAGS_FTM_RESPONDER) {
+ params->ftm_responder = 1;
+ params->lci = hapd->iface->conf->lci;
+ params->civic = hapd->iface->conf->civic;
+ } else {
+ wpa_printf(MSG_WARNING,
+ "Not configuring FTM responder as the driver doesn't advertise its support");
+ }
+ }
+
return 0;
}
--
2.19.1
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
