Include and verify the OCI element in AMPE Open and Confirm frames. Note
that the OCI element is included even if the other STA didn't advertise
support of OCV. The OCI element is only required and verified if both
peers support OCV.
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@xxxxxxxxxxxxxx>
---
wpa_supplicant/mesh_mpm.c | 70 +++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/wpa_supplicant/mesh_mpm.c b/wpa_supplicant/mesh_mpm.c
index fd5b90a42..2f8f79251 100644
--- a/wpa_supplicant/mesh_mpm.c
+++ b/wpa_supplicant/mesh_mpm.c
@@ -12,6 +12,7 @@
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
#include "common/hw_features_common.h"
+#include "common/ocv.h"
#include "ap/hostapd.h"
#include "ap/sta_info.h"
#include "ap/ieee802_11.h"
@@ -245,6 +246,11 @@ static void mesh_mpm_send_plink_action(struct wpa_supplicant *wpa_s,
#endif /* CONFIG_IEEE80211AC */
if (type != PLINK_CLOSE)
buf_len += conf->rsn_ie_len; /* RSN IE */
+#ifdef CONFIG_OCV
+ /* OCI is included even when the other STA doesn't support OCV */
+ if (type != PLINK_CLOSE && conf->ocv)
+ buf_len += OCV_OCI_EXTENDED_LEN;
+#endif
buf = wpabuf_alloc(buf_len);
if (!buf)
@@ -356,6 +362,23 @@ static void mesh_mpm_send_plink_action(struct wpa_supplicant *wpa_s,
}
#endif /* CONFIG_IEEE80211AC */
+#ifdef CONFIG_OCV
+ if (type != PLINK_CLOSE && conf->ocv) {
+ struct wpa_channel_info ci;
+ u8 *pos;
+
+ if (wpa_drv_channel_info(wpa_s, &ci) != 0) {
+ wpa_printf(MSG_WARNING, "Failed to get channel info "
+ "for OCI element");
+ goto fail;
+ }
+
+ pos = (u8*)wpabuf_put(buf, OCV_OCI_EXTENDED_LEN);
+ if (ocv_insert_extended_oci(&ci, pos) < 0)
+ goto fail;
+ }
+#endif /* CONFIG_OCV */
+
if (ampe && mesh_rsn_protect_frame(wpa_s->mesh_rsn, sta, cat, buf)) {
wpa_msg(wpa_s, MSG_INFO,
"Mesh MPM: failed to add AMPE and MIC IE");
@@ -1196,6 +1219,53 @@ void mesh_mpm_action_rx(struct wpa_supplicant *wpa_s,
}
return;
}
+
+#ifdef CONFIG_OCV
+ if (action_field == PLINK_OPEN && elems.rsn_ie) {
+ struct wpa_state_machine *sm = sta->wpa_sm;
+ struct wpa_ie_data data;
+
+ int res = wpa_parse_wpa_ie_rsn(elems.rsn_ie - 2,
+ elems.rsn_ie_len + 2,
+ &data);
+ if (res) {
+ wpa_printf(MSG_DEBUG,
+ "Failed to parse RSN IE (res=%d)",
+ res);
+ wpa_hexdump(MSG_DEBUG, "RSN IE", elems.rsn_ie,
+ elems.rsn_ie_len);
+ return;
+ }
+
+ wpa_auth_set_ocv(sm, mconf->ocv && (data.capabilities
+ & WPA_CAPABILITY_OCVC));
+ }
+
+ if (action_field != PLINK_CLOSE
+ && wpa_auth_uses_ocv(sta->wpa_sm)) {
+ struct wpa_channel_info ci;
+ int tx_chanwidth;
+ int tx_seg1_idx;
+
+ if (wpa_drv_channel_info(wpa_s, &ci) != 0) {
+ wpa_printf(MSG_WARNING,
+ "Failed to get channel info to validate "
+ "received OCI in MPM Confirm");
+ return;
+ } else if (get_tx_parameters(sta,
+ channel_width_to_int(ci.chanwidth),
+ ci.seg1_idx, &tx_chanwidth,
+ &tx_seg1_idx) < 0) {
+ return;
+ }
+
+ if (ocv_verify_tx_params(elems.oci, elems.oci_len, &ci,
+ tx_chanwidth, tx_seg1_idx) != 0) {
+ wpa_printf(MSG_WARNING, ocv_errorstr);
+ return;
+ }
+ }
+#endif /* CONFIG_OCV */
}
if (sta->plink_state == PLINK_BLOCKED) {
--
2.18.0
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
