Hello, I am testing hotspot 2.0 functionality, and can't figure out how to use interworking_select command within wpa_cli utility. I run hs20 test from hwsim directory, pause test with pdb.set_trace(), to get device in desired state and do my other work. interworking_select command that start from python code works perfectly, for example this is output from wpa_cli ... <3>Starting ANQP fetch for 02:00:00:00:03:00 <3>GAS-QUERY-START addr=02:00:00:00:03:00 dialog_token=34 freq=2412 <3>GAS-QUERY-DONE addr=02:00:00:00:03:00 dialog_token=34 freq=2412 status_code=0 result=SUCCESS <3>RX-ANQP 02:00:00:00:03:00 ANQP Capability list <3>RX-ANQP 02:00:00:00:03:00 NAI Realm list <3>RX-ANQP 02:00:00:00:03:00 Domain Name list <3>RX-HS20-ANQP 02:00:00:00:03:00 HS Capability List <3>ANQP-QUERY-DONE addr=02:00:00:00:03:00 result=SUCCESS <3>ANQP fetch completed <3>INTERWORKING-AP 02:00:00:00:03:00 type=home id=0 priority=0 sp_priority=0 <3>INTERWORKING-SELECTED 02:00:00:00:03:00 <3>SME: Trying to authenticate with 02:00:00:00:03:00 (SSID='test-hs20' freq=2412 MHz) <3>Trying to associate with 02:00:00:00:03:00 (SSID='test-hs20' freq=2412 MHz) <3>Associated with 02:00:00:00:03:00 <3>CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 <3>CTRL-EVENT-EAP-STARTED EAP authentication started <3>CTRL-EVENT-EAP-STATUS status='started' parameter='' <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=21 <3>CTRL-EVENT-EAP-STATUS status='accept proposed method' parameter='TTLS' <3>CTRL-EVENT-EAP-METHOD EAP vendor 0 method 21 (TTLS) selected ... But if I try run it manually from wpa_cli (wlan0 and wlan3 still desired configured state because hwsim tests in pause), utility return this > interworking_select Unknown command 'interworking_select' > set interworking 1 OK > set hs20 1 OK > interworking_select Unknown command 'interworking_select' > What should I do to make `interworking_select` command work? -- Vladimir _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
