[PATCH v2 04/15] mesh: use setup completion callback to complete mesh join

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peter Oh <peter.oh@xxxxxxxxxxxxxxxxx>

mesh join function is the last function to be called during
mesh join process, but it's been called a bit earlier than
it's supposed to be, so that some mesh parameter values
such as VHT capabilities not applied correct when mesh join
is in process. Moreover current design of mesh join that is called
directly after mesh initialization is not suitable for DFS channels
to use, since mesh join process should be paused until DFS CAC is
done and resumed once it's done.
Using setup completion callback is how AP mode is using for DFS channels
and mesh can use the same way.
The callback will be called by hostapd_setup_interface_complete_sync.

Signed-off-by: Peter Oh <peter.oh@xxxxxxxxxxxxxxxxx>
---
 wpa_supplicant/mesh.c | 7 +++++--
 wpa_supplicant/mesh.h | 2 +-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
index 88001a1bd..c5b8379cd 100644
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
@@ -215,6 +215,7 @@ static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
 	if (!ifmsh)
 		return -ENOMEM;
 
+	ifmsh->owner = wpa_s;
 	ifmsh->drv_flags = wpa_s->drv_flags;
 	ifmsh->num_bss = 1;
 	ifmsh->bss = os_calloc(wpa_s->ifmsh->num_bss,
@@ -231,6 +232,8 @@ static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
 	bss->drv_priv = wpa_s->drv_priv;
 	bss->iface = ifmsh;
 	bss->mesh_sta_free_cb = mesh_mpm_free_sta;
+	bss->setup_complete_cb = wpas_mesh_complete_cb;
+	bss->setup_complete_cb_ctx = wpa_s;
 	frequency = ssid->frequency;
 	if (frequency != freq->freq &&
 	    frequency == freq->freq + freq->sec_channel_offset * 20) {
@@ -372,8 +375,9 @@ void wpa_supplicant_mesh_add_scan_ie(struct wpa_supplicant *wpa_s,
 }
 
 
-void wpas_join_mesh(struct wpa_supplicant *wpa_s)
+void wpas_mesh_complete_cb(void *ctx)
 {
+	struct wpa_supplicant *wpa_s = (struct wpa_supplicant *)ctx;
 	struct wpa_driver_mesh_join_params *params = wpa_s->mesh_params;
 	struct wpa_ssid *ssid = wpa_s->current_ssid;
 	int ret = 0;
@@ -495,7 +499,6 @@ int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
 		goto out;
 	}
 
-	wpas_join_mesh(wpa_s);
 out:
 	return ret;
 }
diff --git a/wpa_supplicant/mesh.h b/wpa_supplicant/mesh.h
index 995210236..2e2231b68 100644
--- a/wpa_supplicant/mesh.h
+++ b/wpa_supplicant/mesh.h
@@ -21,7 +21,7 @@ int wpas_mesh_add_interface(struct wpa_supplicant *wpa_s, char *ifname,
 int wpas_mesh_peer_remove(struct wpa_supplicant *wpa_s, const u8 *addr);
 int wpas_mesh_peer_add(struct wpa_supplicant *wpa_s, const u8 *addr,
 		       int duration);
-void wpas_join_mesh(struct wpa_supplicant *wpa_s);
+void wpas_mesh_complete_cb(void *ctx);
 int wpas_mesh_init_rsn(struct wpa_supplicant *wpa_s);
 
 #ifdef CONFIG_MESH
-- 
2.11.0 (Apple Git-81)


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux