Hello, One of our testers has observed an issue with lack of dbus WPS fail or WPS timeout messages. Most of the time WPS works fine but tester sometimes sees an issue with WPS connecting, We only have default loglevel from wpa supplicant at the moment. If I manage to reproduce that issue I can provide 'debug' logs. What tester did: * On STA he started WPS request, Role: "enrolee", Type: "pbc" * On AP he pressed WPS button * He was waiting for more than two minutes but Event wps timeout nor wps fail were not received In the log I can see the "wlan2: WPS-FAIL" and after that network dbus object is removed and iface changes state to inactive. Question: 1) Should we always expect signal fi.w1.wpa_supplicant1.Interface.WPS.Event finishing WPS configuration? Apparently in our case this Event did not arrive and iface changed state to idle. 2) Should wps_supplicant.c::wpas_wps_eapol_cb notify dbus about wps fail? It only prints a log wpa_msg(wpa_s, MSG_INFO, WPS_EVENT_FAIL); Log is below: // First method fi.w1.wpa_supplicant1.Interface.WPS.Start was called Jan 12 10:29:53 connectWPS in PBC mode, enrollee Jan 12 10:30:02 wlan2: Trying to associate with 90:5c:44:56:0f:78 (SSID='Shayo2' freq=2437 MHz) // Our application received the following event Jan 12 10:30:02 onWifiIfaceStateChanged WpaSupplicant WPA status:associating Jan 12 10:30:02 wlan2: Associated with 90:5c:44:56:0f:78 Jan 12 10:30:02 wlan2: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0 // Our application received the following events Jan 12 10:30:03 onIfacePropertiesChanged CurrentNetwork: /fi/w1/wpa_supplicant1/Interfaces/1/Networks/0 Jan 12 10:30:03 onCurrentNetworkChanged path:/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0 Jan 12 10:30:03 onWifiIfaceStateChanged WpaSupplicant WPA status:associated Jan 12 10:30:03 onIfacePropertiesChanged lCurrentBSS: /fi/w1/wpa_supplicant1/Interfaces/1/BSSs/154 Jan 12 10:30:03 wlan2: CTRL-EVENT-EAP-STARTED EAP authentication started Jan 12 10:31:03 wlan2: CTRL-EVENT-EAP-FAILURE EAP authentication failed // This log is from wps_supplicant.c::wpas_wps_eapol_cb function Jan 12 10:31:03 wlan2: WPS-FAIL Jan 12 10:31:03 wlan2: CTRL-EVENT-DISCONNECTED bssid=90:5c:44:56:0f:78 reason=3 locally_generated=1 Jan 12 10:31:03 nl80211: Was expecting local disconnect but got another disconnect event first Jan 12 10:31:03 onIfacePropertiesChanged DisconnectReason:-3, status:associated Jan 12 10:31:03 onNetworkRemovedSignal path:/fi/w1/wpa_supplicant1/Interfaces/1/Networks/0 Jan 12 10:31:03 onWifiIfaceStateChanged WpaSupplicant WPA status:disconnected Jan 12 10:31:03 onIfacePropertiesChanged lCurrentBSS: / Jan 12 10:31:03 onIfacePropertiesChanged DisconnectReason:3, status:disconnected Jan 12 10:31:03 onWifiIfaceStateChanged WpaSupplicant WPA status:inactive Thanks Radek _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
