RE: [PATCH 2/4] hostapd: add RSSI based association rejection support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Jouni Malinen [mailto:j@xxxxx]
> Sent: Thursday, September 21, 2017 15:58
> To: Otcheretianski, Andrei <andrei.otcheretianski@xxxxxxxxx>
> Cc: hostap@xxxxxxxxxxxxxxxxxxx; Lev, Beni <beni.lev@xxxxxxxxx>
> Subject: Re: [PATCH 2/4] hostapd: add RSSI based association rejection support
> 
> On Mon, Aug 21, 2017 at 07:43:53PM +0300, Andrei Otcheretianski wrote:
>

Hi Jouni,

> Making a decision to reject an association based on the RSSI of a single frame
> sounds like a bad idea to me. That value can vary a lot from frame to frame.. At

I totally agree with you :)
We mainly wanted to add the STA part to comply with the OCE spec,
the AP part is needed basically to support hwsim testing.

> minimum, I'd expect the AP to include the RSSI of the Authentication frame
> received just before this (Re)Association Request frame and reject the
> association only if both those frames show too low RSSI.

Sure, we will add this.
Though I'm not sure whether using 2 frames will improve this much - may be you want us to put this entire feature  under CONFIG_TESTING_OPTIONS for AP side?

Thanks,
Andrei
> 
> --
> Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux