Hi, I am trying to authenticate a client machine connected to my AP via LAN. I set up configuration files for HostAPaccordingly. If I run HostAP, FreeRadius authentication succeeds. However, after HostAP received success message from FreeRadius, doesn't proceed to AP-STA-CONNECTED STATE, like in the case of wireless authentication. For LAN authentication, HostAP's final logs are: ---------------------------------------------------------------- enx00e04c5394ce: RADIUS Received 167 bytes from RADIUS server enx00e04c5394ce: RADIUS Received RADIUS message enx00e04c5394ce: STA a0:ce:c8:12:e4:ae RADIUS: Received RADIUS packet matched with a pending request, round trip time 0.00 sec RADIUS packet matching with station a0:ce:c8:12:e4:ae MS-MPPE-Send-Key - hexdump(len=32): [REMOVED] MS-MPPE-Recv-Key - hexdump(len=32): [REMOVED] enx00e04c5394ce: STA a0:ce:c8:12:e4:ae IEEE 802.1X: old identity 'teemu' updated with User-Name from Access-Accept 'teemu' enx00e04c5394ce: STA a0:ce:c8:12:e4:ae IEEE 802.1X: decapsulated EAP packet (code=3 id=110 len=4) from RADIUS server: EAP Success EAP: EAP entering state SUCCESS2 IEEE 802.1X: a0:ce:c8:12:e4:ae BE_AUTH entering state SUCCESS enx00e04c5394ce: STA a0:ce:c8:12:e4:ae IEEE 802.1X: Sending EAP Packet (identifier 110) IEEE 802.1X: a0:ce:c8:12:e4:ae BE_AUTH entering state IDLE ------------------------------------------------------------------ But if I test wireless authentication, get the following additional logs, all the way up to AP-STA-CONNECTED: -------------------------------------------------------------- WPA: e4:a7:a0:b7:f7:dc WPA_PTK entering state PTKCALCNEGOTIATING2 WPA: e4:a7:a0:b7:f7:dc WPA_PTK entering state PTKINITNEGOTIATING wlp1s0: STA e4:a7:a0:b7:f7:dc WPA: sending 3/4 msg of 4-Way Handshake WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=1 kde_len=50 keyidx=1 encr=1) WPA: Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 02 Plaintext EAPOL-Key Key Data - hexdump(len=64): [REMOVED] WPA: Use EAPOL-Key timeout of 100 ms (retry counter 1) wlp1s0: Event EAPOL_TX_STATUS (38) received IEEE 802.1X: e4:a7:a0:b7:f7:dc TX status - version=2 type=3 length=159 - ack=1 WPA: EAPOL-Key TX status for STA e4:a7:a0:b7:f7:dc ack=1 wlp1s0: Event EAPOL_RX (24) received IEEE 802.1X: 99 bytes from e4:a7:a0:b7:f7:dc IEEE 802.1X: version=1 type=3 length=95 WPA: Received EAPOL-Key from e4:a7:a0:b7:f7:dc key_info=0x30a type=2 key_data_length=0 WPA: Received Key Nonce - hexdump(len=32): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 WPA: Received Replay Counter - hexdump(len=8): 00 00 00 00 00 00 00 02 wlp1s0: STA e4:a7:a0:b7:f7:dc WPA: received EAPOL-Key frame (4/4 Pairwise) WPA: e4:a7:a0:b7:f7:dc WPA_PTK entering state PTKINITDONE wpa_driver_nl80211_set_key: ifindex=2 (wlp1s0) alg=3 addr=0x557b9b08c4b0 key_idx=0 set_tx=1 seq_len=0 key_len=16 nl80211: KEY_DATA - hexdump(len=16): [REMOVED] addr=e4:a7:a0:b7:f7:dc wlp1s0: STA e4:a7:a0:b7:f7:dc WPA: pairwise key handshake completed (RSN) IEEE 802.1X: e4:a7:a0:b7:f7:dc AUTH_PAE entering state AUTHENTICATED wlp1s0: AP-STA-CONNECTED e4:a7:a0:b7:f7:dc --------------------------------------------------------------------------- Please note that WPA is executing above, while my LAN authentication HostAP doesn't execute WPA. Is HostAP not supposed to get to AP-STA-CONNECTED state when authenticating a client connected via LAN? I hope I could get some clue on this problem.. Thanks for anybody's help in advance. _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
