Re: [PATCH] TDLS: Added dbus method to enable channel switching with TDLS peer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2017-05-01 at 09:35 +0530, Nishant Chaprana wrote:
> Description: This patch adds "TDLSChannelSwitch" dbus method on
> 	     "fi.w1.wpa_supplicant1.Interface" interface to enable
> 	     channel switching with TDLS peer.
> 
> > Do we expect more TDLS-related methods?  If we expect more than say
> > 3
> > or so, then it might make sense to make TDLS another D-Bus
> > interface
> > that the wpa_supplicant "Interface" object implements.
> 
> Only below two new methods are required for TDLS.
> 1. TDLSChannelSwitch
> 2. TDLSCancelChannelSwitch
> Below is the patch resolving your comments.

Thanks for the update, LGTM.

Dan

> Signed-off-by: Nishant Chaprana <n.chaprana@xxxxxxxxxxx>
> ---
>  wpa_supplicant/dbus/dbus_new.c          |   7 ++
>  wpa_supplicant/dbus/dbus_new_handlers.c | 123
> ++++++++++++++++++++++++++++++++
>  wpa_supplicant/dbus/dbus_new_handlers.h |   2 +
>  3 files changed, 132 insertions(+)
> 
> diff --git a/wpa_supplicant/dbus/dbus_new.c
> b/wpa_supplicant/dbus/dbus_new.c
> index 0c355f7..0dce09e 100644
> --- a/wpa_supplicant/dbus/dbus_new.c
> +++ b/wpa_supplicant/dbus/dbus_new.c
> @@ -3086,6 +3086,13 @@ static const struct wpa_dbus_method_desc
> wpas_dbus_interface_methods[] = {
>  		  END_ARGS
>  	  }
>  	},
> +	{ "TDLSChannelSwitch", WPAS_DBUS_NEW_IFACE_INTERFACE,
> +	  (WPADBusMethodHandler)
> wpas_dbus_handler_tdls_channel_switch,
> +	  {
> +		  { "args", "a{sv}", ARG_IN },
> +		  END_ARGS
> +	  }
> +	},
>  #endif /* CONFIG_TDLS */
>  	{ "VendorElemAdd", WPAS_DBUS_NEW_IFACE_INTERFACE,
>  	  (WPADBusMethodHandler) wpas_dbus_handler_vendor_elem_add,
> diff --git a/wpa_supplicant/dbus/dbus_new_handlers.c
> b/wpa_supplicant/dbus/dbus_new_handlers.c
> index 56e6aab..7063e5a 100644
> --- a/wpa_supplicant/dbus/dbus_new_handlers.c
> +++ b/wpa_supplicant/dbus/dbus_new_handlers.c
> @@ -2292,6 +2292,129 @@ DBusMessage *
> wpas_dbus_handler_tdls_teardown(DBusMessage *message,
>  	return NULL;
>  }
>  
> +/*
> + * wpas_dbus_handler_tdls_channel_switch - Enable channel switching
> with TDLS peer
> + * @message: Pointer to incoming dbus message
> + * @wpa_s: wpa_supplicant structure for a network interface
> + * Returns: NULL indicating success or DBus error message on failure
> + *
> + * Handler function for "TDLSChannelSwitch" method call of network
> interface.
> + */
> +DBusMessage * wpas_dbus_handler_tdls_channel_switch(DBusMessage
> *message,
> +						    struct
> wpa_supplicant *wpa_s)
> +{
> +	DBusMessageIter	iter, iter_dict;
> +	struct wpa_dbus_dict_entry entry;
> +	u8 peer[ETH_ALEN];
> +	struct hostapd_freq_params freq_params;
> +	u8 oper_class = 0;
> +	int ret;
> +	int is_peer_present = 0;
> +
> +	if (!wpa_tdls_is_external_setup(wpa_s->wpa)) {
> +		wpa_printf(MSG_INFO,
> +			   "tdls_chanswitch: Only supported with
> external setup");
> +		return wpas_dbus_error_unknown_error(message, "tdls
> is not external setup");
> +	}
> +
> +	os_memset(&freq_params, 0, sizeof(freq_params));
> +
> +	dbus_message_iter_init(message, &iter);
> +
> +	if (!wpa_dbus_dict_open_read(&iter, &iter_dict, NULL))
> +		return wpas_dbus_error_invalid_args(message, NULL);
> +
> +	while (wpa_dbus_dict_has_dict_entry(&iter_dict)) {
> +		if (!wpa_dbus_dict_get_entry(&iter_dict, &entry))
> +			return wpas_dbus_error_invalid_args(message,
> NULL);
> +
> +		if (os_strcmp(entry.key, "PeerAddress") == 0 &&
> +		    entry.type == DBUS_TYPE_STRING) {
> +			if (hwaddr_aton(entry.str_value, peer)) {
> +				wpa_printf(MSG_DEBUG,
> +					   "tdls_chanswitch: Invalid
> address '%s'",
> +					   entry.str_value);
> +				wpa_dbus_dict_entry_clear(&entry);
> +				return
> wpas_dbus_error_invalid_args(message,
> +								    
> NULL);
> +			}
> +
> +			is_peer_present = 1;
> +
> +		} else if (os_strcmp(entry.key, "OperClass") == 0 &&
> +			   entry.type == DBUS_TYPE_BYTE) {
> +			oper_class = entry.byte_value;
> +
> +		} else if (os_strcmp(entry.key, "Frequency") == 0 &&
> +			   entry.type == DBUS_TYPE_UINT32) {
> +			freq_params.freq = entry.uint32_value;
> +
> +		} else if (os_strcmp(entry.key, "SecChannelOffset")
> == 0 &&
> +			   entry.type == DBUS_TYPE_UINT32) {
> +			freq_params.sec_channel_offset =
> entry.uint32_value;
> +
> +		} else if (os_strcmp(entry.key, "CenterFrequency1")
> == 0 &&
> +			   entry.type == DBUS_TYPE_UINT32) {
> +			freq_params.center_freq1 =
> entry.uint32_value;
> +
> +		} else if (os_strcmp(entry.key, "CenterFrequency2")
> == 0 &&
> +			   entry.type == DBUS_TYPE_UINT32) {
> +			freq_params.center_freq2 =
> entry.uint32_value;
> +
> +		} else if (os_strcmp(entry.key, "Bandwidth") == 0 &&
> +			   entry.type == DBUS_TYPE_UINT32) {
> +			freq_params.bandwidth = entry.uint32_value;
> +
> +		} else if (os_strcmp(entry.key, "HT") == 0 &&
> +			   entry.type == DBUS_TYPE_BOOLEAN) {
> +			freq_params.ht_enabled = entry.bool_value;
> +
> +		} else if (os_strcmp(entry.key, "VHT") == 0 &&
> +			   entry.type == DBUS_TYPE_BOOLEAN) {
> +			freq_params.vht_enabled = entry.bool_value;
> +
> +		} else {
> +			wpa_dbus_dict_entry_clear(&entry);
> +			return wpas_dbus_error_invalid_args(message,
> NULL);
> +		}
> +
> +		wpa_dbus_dict_entry_clear(&entry);
> +	}
> +
> +	if (oper_class == 0) {
> +		wpa_printf(MSG_INFO,
> +			   "tdls_chanswitch: Invalid op class
> provided");
> +		return wpas_dbus_error_invalid_args(message,
> "Invalid op class provided");
> +	}
> +
> +	if (freq_params.freq == 0) {
> +		wpa_printf(MSG_INFO,
> +			   "tdls_chanswitch: Invalid freq
> provided");
> +		return wpas_dbus_error_invalid_args(message,
> "Invalid freq provided");
> +	}
> +
> +	if (is_peer_present == 0) {
> +		wpa_printf(MSG_DEBUG,
> +			   "tdls_chanswitch: peer address not
> provided");
> +		return wpas_dbus_error_invalid_args(message, "peer
> address not provided");
> +	}
> +
> +	wpa_printf(MSG_DEBUG, "DBUS TDLS_CHAN_SWITCH " MACSTR
> +		   " OP CLASS %d FREQ %d CENTER1 %d CENTER2 %d BW %d
> SEC_OFFSET %d%s%s",
> +		   MAC2STR(peer), oper_class, freq_params.freq,
> +		   freq_params.center_freq1,
> freq_params.center_freq2,
> +		   freq_params.bandwidth,
> freq_params.sec_channel_offset,
> +		   freq_params.ht_enabled ? " HT" : "",
> +		   freq_params.vht_enabled ? " VHT" : "");
> +
> +	ret = wpa_tdls_enable_chan_switch(wpa_s->wpa, peer,
> oper_class,
> +					  &freq_params);
> +	if (ret)
> +		return wpas_dbus_error_unknown_error(message, "error
> processing TDLS channel switch");
> +
> +	return NULL;
> +}
> +
>  #endif /* CONFIG_TDLS */
>  
>  
> diff --git a/wpa_supplicant/dbus/dbus_new_handlers.h
> b/wpa_supplicant/dbus/dbus_new_handlers.h
> index 3b8f096..3987c07 100644
> --- a/wpa_supplicant/dbus/dbus_new_handlers.h
> +++ b/wpa_supplicant/dbus/dbus_new_handlers.h
> @@ -213,6 +213,8 @@ DBusMessage *
> wpas_dbus_handler_tdls_status(DBusMessage *message,
>  					    struct wpa_supplicant
> *wpa_s);
>  DBusMessage * wpas_dbus_handler_tdls_teardown(DBusMessage *message,
>  					      struct wpa_supplicant
> *wpa_s);
> +DBusMessage * wpas_dbus_handler_tdls_channel_switch(DBusMessage
> *message,
> +						    struct
> wpa_supplicant *wpa_s);
>  
>  DBusMessage * wpas_dbus_handler_vendor_elem_add(DBusMessage
> *message,
>  						struct
> wpa_supplicant *wpa_s);

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux