Hello everyone, I write here because I encounter a problem when I try to use TDLS actions with wpa_cli. I am on Ubuntu 14 (trusty), and try to connect to an access point on a Nexus5. So : 1. I downloaded wpa_supplicant-2.6 sources on https://w1.fi/wpa_supplicant/ 2. In the file wpa_supplicant of the archive, I copied "wpa_supplicant/defconfig" as "wpa_supplicant/.config" 3. In the file wpa_supplicant/.config, I uncommented "#CONFIG_LIBNL32=y" and "#CONFIG_TDLS=y" 4. I launched "make" in wpa_supplicant/ 5. The 3 following files were created : "wpa_supplicant/wpa_supplicant", "wpa_supplicant/wpa_cli" and "wpa_supplicant/wpa_passphrase". I copied them in another directory and made them executables. 6. I checked that no other process wpasupplicant were running 7. I launched "./wpa_supplicant -D nl80211 -i wlan0 - config1.conf" with config1.conf : ----------- ctrl_interface=/var/run/wpa_supplicant update_config=1 network={ ssid="AndroidAP" #psk="password" psk=ec91f03216fdc8d1ea743dbb14b2852113cd1aa2ddd8d36d84025f3562eff782 } ----------- 8. After the command "dhclient wlan0", I was connected to the AP, and could ping another device connected to it. 9. I then launched "./wpa_cli" In wpa_cli, the command "status", for instance, worked well. But when I launched "tdls_discover <addr>", it returns "FAIL" ("tdls_setup" or "tdls_teardown" have similar behaviour). With some wpa_printf, I get the error code : -95 (Operation not supported), and I can't figure what I can do. That is why I will be very very very thankful if you have some advices. :) Thank you for your consideration, Nylwosh _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
