On Sat, 2017-04-15 at 10:56 +0200, Gilles wrote: > Here's the output from 1) sending the two commands, and 2) > /var/log/syslog while I attempt to connect to my WPA-protected home > AP: > > https://pastebin.com/raw/mhumwTkp The first attempt successfully associates and 4-way handshakes with the AP. But then there is no DHCP reply, so NetworkManager terminates the connection because it cannot get an IP address. Then NM asks the supplicant to try again. The supplicant associates successfully, but then never receives the EAPOL frame from the AP that starts the 4-way handshake. After a few seconds (waiting for that frame) the driver disconnects from the AP (Reason: 15=4WAY_HANDSHAKE_TIMEOUT). All further attempts result in (Reason: 15=4WAY_HANDSHAKE_TIMEOUT). This is either a driver/supplicant problem, or an AP problem. There could be a race condition in the supplicant or driver that is discarding the EAPOL frame after association but before it's in a state to process the start of the 4-way handshake. If other devices work fine with this AP, that's what I'd guess the problem is. I'll have to toss it over to Jouni to go further on that... Dan > I hit CTRL+C after about one minute since it still couldn't connect. > > On 14/04/2017 19:42, Dan Williams wrote: > > On Fri, 2017-04-14 at 11:23 +0200, Gilles wrote: > > > On 14/04/2017 05:36, Dan Williams wrote: > > > > sudo dbus-send --system --print-reply -- > > > > dest=fi.w1.wpa_supplicant1 > > > > /fi/w1/wpa_supplicant1 org.freedesktop.DBus.Properties.Set > > > > string:fi.w1.wpa_supplicant1 string:DebugTimestamp > > > > variant:boolean:true > > > > > > > > sudo dbus-send --system --print-reply -- > > > > dest=fi.w1.wpa_supplicant1 > > > > /fi/w1/wpa_supplicant1 org.freedesktop.DBus.Properties.Set > > > > string:fi.w1.wpa_supplicant1 string:DebugLevel > > > > variant:string:"msgdump" > > > > > > It fails running the first command: > > > > > > mint ~ # dbus-send --system --print-reply -- > > > dest=fi.w1.wpa_supplicant1 > > > /fi/w1/wpa_supplicant1 > > > org.freedesktop.DBus.Properties.Setstring:fi.w1.wpa_supplicant1 > > > string:DebugTimestamp variant:boolean:true > > > > Ah sorry, looks like the linewrapping made things fail. Should be: > > > > sudo dbus-send --system --print-reply --dest=fi.w1.wpa_supplicant1 > > \ > > /fi/w1/wpa_supplicant1 org.freedesktop.DBus.Properties.Set \ > > string:fi.w1.wpa_supplicant1 string:DebugTimestamp \ > > variant:boolean:true > > > > sudo dbus-send --system --print-reply --dest=fi.w1.wpa_supplicant1 > > \ > > /fi/w1/wpa_supplicant1 org.freedesktop.DBus.Properties.Set \ > > string:fi.w1.wpa_supplicant1 string:DebugLevel \ > > variant:string:"msgdump" > > > > _______________________________________________ > Hostap mailing list > Hostap@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/hostap _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
