Hi All, I've got the following error message for my hostapd run on OpenWrt Chaos Calmer: Configuration file: /var/run/hostapd-phy0.conf rfkill: Cannot open RFKILL control device Using interface wlan0 with hwaddr 74:da:38:68:72:84 and ssid "OpenWrt" x_snoop: Failed to enable proxyarp on the bridge port Generic snooping infrastructure initialization failed!!! Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. wlan0: interface state DISABLED->DISABLED wlan0: AP-DISABLED hostapd_free_hapd_data: Interface wlan0 wasn't started nl80211: deinit ifname=wlan0 disabled_11b_rates=0 ELOOP: remaining socket: sock=13 eloop_data=0xbf2728 user_data=(nil) handler=0x3a3a0 Here is my hostapd-phy0.conf: driver=nl80211 logger_syslog=127 logger_syslog_level=0 logger_stdout=127 logger_stdout_level=0 hw_mode=g channel=11 proxy_arp=1 disable_dgaf=1 ieee80211n=1 ht_coex=0 ht_capab=[SHORT-GI-20][SHORT-GI-40][MAX-AMSDU-7935][DSSS_CCK-40] interface=wlan0 ctrl_interface=/var/run/hostapd ap_isolate=1 disassoc_low_ack=1 preamble=1 wmm_enabled=1 ignore_broadcast_ssid=0 uapsd_advertisement_enabled=1 wpa_psk_file=/etc/hostapd-psk auth_algs=1 wpa=2 wpa_pairwise=CCMP ssid=OpenWrt bridge=br-wifi wpa_key_mgmt=WPA-PSK okc=0 disable_pmksa_caching=1 bssid=74:da:38:68:72:84 I enabled disable_dgaf=1 and proxy_arp=1 as you can see here. My setup is that I activated ap_isolate=1 and also I created a bridge br-wifi to bridge different devices inside my network. Question is what's the reason for this x_snoop error message. Would appreciate if anyone has any idea about what's happening. Thank you! -- Kind regards, Rahmadi _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap