From: Avraham Stern <avraham.stern@xxxxxxxxx>
Use the new hostapd.add_app() API (i.e., pass the ap device as a
parameter instead of the interface name) in beacon report tests to
make them remote compatible, and mark them appropriately.
Signed-off-by: Avraham Stern <avraham.stern@xxxxxxxxx>
---
tests/hwsim/test_rrm.py | 108 ++++++++++++++++++++++++++++--------------------
1 file changed, 63 insertions(+), 45 deletions(-)
diff --git a/tests/hwsim/test_rrm.py b/tests/hwsim/test_rrm.py
index ddca02c..39c558b 100644
--- a/tests/hwsim/test_rrm.py
+++ b/tests/hwsim/test_rrm.py
@@ -18,6 +18,7 @@ import hostapd
from wpasupplicant import WpaSupplicant
from utils import HwsimSkip, alloc_fail, fail_test, wait_fail_trigger
from test_ap_ht import clear_scan_cache
+from remotehost import remote_compatible
def check_rrm_support(dev):
rrm = int(dev.get_driver_status_field("capa.rrm_flags"), 16)
@@ -741,11 +742,12 @@ def run_req_beacon(hapd, addr, request):
raise Exception("Unexected ACK status in TX status: " + fields[3])
return token
+@remote_compatible
def test_rrm_beacon_req_table(dev, apdev):
"""Beacon request - beacon table mode"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another" })
tests = [ "REQ_BEACON ",
"REQ_BEACON q",
@@ -783,10 +785,11 @@ def test_rrm_beacon_req_table(dev, apdev):
if len(report.frame_body) <= 12:
raise Exception("Too short Reported Frame Body subelement")
+@remote_compatible
def test_rrm_beacon_req_table_detail(dev, apdev):
"""Beacon request - beacon table mode - reporting detail"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -845,10 +848,11 @@ def test_rrm_beacon_req_table_detail(dev, apdev):
raise Exception("Unexpected beacon report response to invalid reporting detail")
hapd.dump_monitor()
+@remote_compatible
def test_rrm_beacon_req_table_request(dev, apdev):
"""Beacon request - beacon table mode - request element"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -887,10 +891,11 @@ def test_rrm_beacon_req_table_request(dev, apdev):
raise Exception("Unexpected beacon report response (multiple request subelements)")
hapd.dump_monitor()
+@remote_compatible
def test_rrm_beacon_req_table_request_oom(dev, apdev):
"""Beacon request - beacon table mode - request element OOM"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -929,11 +934,12 @@ def test_rrm_beacon_req_table_request_oom(dev, apdev):
if len(fields[4]) > 0:
raise Exception("Unexpected beacon report received")
+@remote_compatible
def test_rrm_beacon_req_table_bssid(dev, apdev):
"""Beacon request - beacon table mode - specific BSSID"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -952,11 +958,12 @@ def test_rrm_beacon_req_table_bssid(dev, apdev):
if ev is not None:
raise Exception("Unexpected beacon report response")
+@remote_compatible
def test_rrm_beacon_req_table_ssid(dev, apdev):
"""Beacon request - beacon table mode - specific SSID"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -994,10 +1001,11 @@ def test_rrm_beacon_req_table_ssid(dev, apdev):
raise Exception("Unexpected beacon report response (invalid SSID subelement in request)")
hapd.dump_monitor()
+@remote_compatible
def test_rrm_beacon_req_table_info(dev, apdev):
"""Beacon request - beacon table mode - Reporting Information subelement"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1016,10 +1024,11 @@ def test_rrm_beacon_req_table_info(dev, apdev):
raise Exception("Unexpected beacon report response (invalid reporting information length)")
hapd.dump_monitor()
+@remote_compatible
def test_rrm_beacon_req_table_unknown_subelem(dev, apdev):
"""Beacon request - beacon table mode - unknown subelement"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1032,10 +1041,11 @@ def test_rrm_beacon_req_table_unknown_subelem(dev, apdev):
report = BeaconReport(binascii.unhexlify(fields[4]))
logger.info("Received beacon report: " + str(report))
+@remote_compatible
def test_rrm_beacon_req_table_truncated_subelem(dev, apdev):
"""Beacon request - beacon table mode - Truncated subelement"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1046,11 +1056,12 @@ def test_rrm_beacon_req_table_truncated_subelem(dev, apdev):
raise Exception("Unexpected beacon report response (truncated subelement)")
hapd.dump_monitor()
+@remote_compatible
def test_rrm_beacon_req_table_rsne(dev, apdev):
"""Beacon request - beacon table mode - RSNE truncation"""
params = hostapd.wpa2_params(ssid="rrm-rsn", passphrase="12345678")
params["rrm_beacon_report"] = "1"
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm-rsn", psk="12345678", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1130,12 +1141,12 @@ def test_rrm_beacon_req_table_vht(dev, apdev):
subprocess.call(['iw', 'reg', 'set', '00'])
dev[0].flush_scan_cache()
+@remote_compatible
def test_rrm_beacon_req_active(dev, apdev):
"""Beacon request - active scan mode"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1156,14 +1167,15 @@ def test_rrm_beacon_req_active(dev, apdev):
if report.opclass != 81 or report.channel != 11:
raise Exception("Incorrect opclass/channel for AP1")
+@remote_compatible
def test_rrm_beacon_req_active_ignore_old_result(dev, apdev):
"""Beacon request - active scan mode and old scan result"""
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another" })
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another" })
dev[0].scan_for_bss(apdev[1]['bssid'], freq=2412)
hapd2.disable()
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1233,12 +1245,12 @@ def test_rrm_beacon_req_active_many(dev, apdev):
if ok:
break
+@remote_compatible
def test_rrm_beacon_req_active_ap_channels(dev, apdev):
"""Beacon request - active scan mode with AP Channel Report subelement"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1259,12 +1271,12 @@ def test_rrm_beacon_req_active_ap_channels(dev, apdev):
if report.opclass != 81 or report.channel != 11:
raise Exception("Incorrect opclass/channel for AP1")
+@remote_compatible
def test_rrm_beacon_req_passive_ap_channels(dev, apdev):
"""Beacon request - passive scan mode with AP Channel Report subelement"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1285,12 +1297,12 @@ def test_rrm_beacon_req_passive_ap_channels(dev, apdev):
if report.opclass != 81 or report.channel != 11:
raise Exception("Incorrect opclass/channel for AP1")
+@remote_compatible
def test_rrm_beacon_req_active_single_channel(dev, apdev):
"""Beacon request - active scan mode with single channel"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1304,12 +1316,12 @@ def test_rrm_beacon_req_active_single_channel(dev, apdev):
report = BeaconReport(binascii.unhexlify(fields[4]))
logger.info("Received beacon report: " + str(report))
+@remote_compatible
def test_rrm_beacon_req_active_ap_channels_unknown_opclass(dev, apdev):
"""Beacon request - active scan mode with AP Channel Report subelement and unknown opclass"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1320,12 +1332,12 @@ def test_rrm_beacon_req_active_ap_channels_unknown_opclass(dev, apdev):
if ev is not None:
raise Exception("Unexpected Beacon report")
+@remote_compatible
def test_rrm_beacon_req_active_ap_channel_oom(dev, apdev):
"""Beacon request - AP Channel Report subelement and OOM"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1337,10 +1349,11 @@ def test_rrm_beacon_req_active_ap_channel_oom(dev, apdev):
if ev is not None:
raise Exception("Unexpected Beacon report during OOM")
+@remote_compatible
def test_rrm_beacon_req_active_scan_fail(dev, apdev):
"""Beacon request - Active scan failure"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1355,12 +1368,12 @@ def test_rrm_beacon_req_active_scan_fail(dev, apdev):
if fields[3] != "04":
raise Exception("Unexpected Beacon report contents: " + ev)
+@remote_compatible
def test_rrm_beacon_req_active_zero_duration(dev, apdev):
"""Beacon request - Action scan and zero duration"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1370,10 +1383,11 @@ def test_rrm_beacon_req_active_zero_duration(dev, apdev):
if ev is not None:
raise Exception("Unexpected Beacon report")
+@remote_compatible
def test_rrm_beacon_req_active_fail_random(dev, apdev):
"""Beacon request - active scan mode os_get_random failure"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1386,12 +1400,12 @@ def test_rrm_beacon_req_active_fail_random(dev, apdev):
report = BeaconReport(binascii.unhexlify(fields[4]))
logger.info("Received beacon report: " + str(report))
+@remote_compatible
def test_rrm_beacon_req_passive(dev, apdev):
"""Beacon request - passive scan mode"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
- hapd2 = hostapd.add_ap(apdev[1]['ifname'], { "ssid": "another",
- "channel": "11" })
+ hapd = hostapd.add_ap(apdev[0], params)
+ hapd2 = hostapd.add_ap(apdev[1], { "ssid": "another", "channel": "11" })
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1412,10 +1426,11 @@ def test_rrm_beacon_req_passive(dev, apdev):
if report.opclass != 81 or report.channel != 11:
raise Exception("Incorrect opclass/channel for AP1")
+@remote_compatible
def test_rrm_beacon_req_passive_no_match(dev, apdev):
"""Beacon request - passive scan mode and no matching BSS"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1428,10 +1443,11 @@ def test_rrm_beacon_req_passive_no_match(dev, apdev):
if len(fields[4]) > 0:
raise Exception("Unexpected beacon report BSS")
+@remote_compatible
def test_rrm_beacon_req_passive_no_match_oom(dev, apdev):
"""Beacon request - passive scan mode and no matching BSS (OOM)"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1452,10 +1468,11 @@ def test_rrm_beacon_req_passive_no_match_oom(dev, apdev):
if len(fields[4]) > 0:
raise Exception("Unexpected beacon report BSS")
+@remote_compatible
def test_rrm_beacon_req_active_duration_mandatory(dev, apdev):
"""Beacon request - Action scan and duration mandatory"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
dev[0].connect("rrm", key_mgmt="NONE", scan_freq="2412")
addr = dev[0].own_addr()
@@ -1683,10 +1700,11 @@ def test_rrm_req_when_rrm_not_used(dev, apdev):
if "OK" not in dev[0].request("MGMT_RX_PROCESS freq=2412 datarate=0 ssi_signal=-30 frame=" + hdr + "0502000000"):
raise Exception("MGMT_RX_PROCESS failed")
+@remote_compatible
def test_rrm_req_proto(dev, apdev):
"""Radio measurement request - protocol testing"""
params = { "ssid": "rrm", "rrm_beacon_report": "1" }
- hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ hapd = hostapd.add_ap(apdev[0], params)
bssid = hapd.own_addr()
dev[0].request("SET LCI ")
--
1.9.1
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
