+ linux-wireless On 2-3-2017 10:28, ravin goyal wrote: > Hi Arend > > Thanks, I will certainly try with brcmfmac if you say so. > Currently I am testing hostapd on orange pi zero board running debian > jessie and its wlan driver is xradio_wlan and it is working fine. > I don't know why raspbian and debian have introduced bcmdhd for WLAN > in their distros. > I have filed bug on raspbian but received on response yet. Now it gets confusing. From what I found xradio_wlan is for some Allwinner flavor based on ST/Ericsson chipset with sdio id 0020:2281. That would not be a device that bcmdhd would try to bind to. Regards, Arend > Regards > Ravin > > On 1 March 2017 at 18:59, Arend Van Spriel <arend.vanspriel@xxxxxxxxxxxx> wrote: >> On 28-2-2017 23:28, Jouni Malinen wrote: >>> On Tue, Feb 28, 2017 at 04:06:48PM +0530, ravin goyal wrote: >>>> I am sharing link to recent debug log related to de-auth messages in >>>> hostapd, I hope it might help to figure out what's really happening >>>> and to know whether it is due to driver or hostapd. >>>> >>>> Please take a look at this. >>>> >>>> link to log file: https://clbin.com/0flGD >>> >>> It looks like number of the disconnections in the two logs are triggered >>> by station inactivity check: >>> >>> 1488275056.529235: wlan0: Station 00:73:8d:43:87:2e has been inactive too long: 308 sec, max allowed: 300 >>> 1488275056.529389: Polling STA >>> 1488275056.529457: nl80211: send_mlme - da= 00:73:8d:43:87:2e noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x248 (WLAN_FC_STYPE_NULLFUNC) nlmode=3 >>> 1488275056.529574: nl80211: Use bss->freq=2442 >>> 1488275056.529634: nl80211: CMD_FRAME freq=2442 wait=0 no_cck=0 no_ack=0 offchanok=0 >>> 1488275056.529711: CMD_FRAME - hexdump(len=24): 48 02 00 00 00 73 8d 43 87 2e 02 1a 11 f5 47 06 02 1a 11 f5 47 06 00 00 >>> 1488275056.530129: nl80211: Frame command failed: ret=-22 (Invalid argument) (freq=2442 wait=0) >>> 1488275056.530231: nl80211_send_null_frame: Failed to send poll frame >>> 1488275056.530295: ap_handle_timer: register ap_handle_timer timeout for 00:73:8d:43:87:2e (1 seconds - AP_DISASSOC_DELAY) >>> >>> >>> This code should not have been triggered at all if the driver reported >>> activity in the expected way, so I'm assuming the driver does not >>> support that.. And then it does not support sending out the poll frame >>> to check whether the STA is still there. >>> >>> You might be able to work around this by setting a significantly larger >>> ap_max_inactivity value in hostapd.conf, but for a proper fix, someone >>> more familiar with the particular driver would need to take a look at >>> what's happening and why the driver does not indicate station activity. >> >> I would suggest trying brcmfmac instead of bcmdhd. The bcmdhd is >> specifically for Android and verification is done on Android targets. >> Not saying your problems will be gone, but at least you can ask me for help. >> >> Regards, >> Arend _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
