Hi,
On Fri, 2017-02-24 at 10:58 +0100, Jörg Krause wrote:
> Hi,
>
> if the wireless interface is operation in AP mode, WPS can be
> initiated, but it does not work with the brcmfmac driver. I wonder,
> if
> WPS should work in AP mode anyway?
See my note below...
> At least, the brcmfmac driver prints
> some error messages:
>
> """
> [ 2205.581521] brcmfmac: brcmf_vif_set_mgmt_ie: vndr ie set error :
> -30
> [ 2205.589314] brcmfmac: brcmf_config_ap_mgmt_ie: Set Beacon IE
> Failed
> """
>
> The configuration:
>
> """
> ctrl_interface=/var/run/wpa_supplicant
> update_config=1
>
> network={
> ssid="AP"
> key_mgmt=NONE
> mode=2
> id_str="ap"
> }
> """
>
> Steps to reproduce:
>
> """
> # uname -r
> 4.9.12
> # wpa_supplicant -v
> wpa_supplicant v2.6
> #
> # modprobe brcmfmac
> # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
> # wpa_cli
> > wps_pbc
>
> [ 2205.581521] brcmfmac: brcmf_vif_set_mgmt_ie: vndr ie set error :
> -30
> [ 2205.589314] brcmfmac: brcmf_config_ap_mgmt_ie: Set Beacon IE
> Failed
> OK
> <3>WPS-PBC-ACTIVE
> <3>WPS-TIMEOUT
> > [ 2325.607589] brcmfmac: brcmf_vif_set_mgmt_ie: vndr ie set error :
>
> -30
> [ 2325.615485] brcmfmac: brcmf_config_ap_mgmt_ie: Set Beacon IE
> Failed
> """
>
> The issue has been reported to the linux-wireless mailing list [1].
>
> So, should WPS work in AP mode?
In case I was not clear enough: Does wpa_supplicant (not hostapd)
support WPS in AP mode.
Jörg
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
