Hi, when "display" is set as config method for WPS, wpa_supplicant/hostapd set also "virtual_display" in order to follow WPS technical specifications v2.0. However, I checked them and they say for Display: "A dynamic 4 or 8 digit PIN is available from a display. Version 2.0 devices shall qualify the display as Virtual (0x2008) or Physical (0x4008)." >From my understood, wpa_supplicant is mainly used on desktop and embedded systems, in both cases the devices are mostly equipped with a screen/display. Isn't it more appropriated to add "physical_display" instead of "virtual_display"? According to the specifications: Virtual Display PIN: "The dynamic 4 or 8 digit PIN is displayed through a remote user interface. For example using the management html page of an AP to obtain the dynamic PIN." Physical Display PIN: "The dynamic 4 or 8 digit PIN is shown on a display/screen that is part of the device. For example obtaining the dynamic PIN from the LCD screen on a printer." What do you think? Regards, Jose Blanquicet _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
