Hi, I have been playing with Hostapd patched for WPE on Kali. It is a patch to make HostAPd (2.6) an Enterprise AP and accept and log all credentials entered. With a stock configuration, it works just fine on most OSes (tested: Ubuntu 16.04, 16.10, iOS 10.1 and 10.2) but Windows 10 (14393) fails without much explanation. However, in a set-up where HostAPd forwards the request to Freeradius 3.0.12, it works just fine with Windows 10. There is a ticket about the issue: https://trac.aircrack-ng.org/ticket/1708 To summarize the ticket, by enabling debug (-d) when running hostapd, it seems like it is failing right before switching to Phase 2. It doesn't seem to get the data for phase 2 correctly as you can see in the log excerpt in the ticket. According to some forums, Windows might have had some issue with TLS v1.2 so I tried to recompile with TLS v1.2 disabled but it still failed (and also tried disabling also v1.1, no success). I also tried latest hostapd git from a day or 2 ago and the problem still persists. Can anybody shed some light on what/where the problem is or if there is something wrong with the set-up? If needed, I kept the success and failure logs and I can send them for analysis. Thomas _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
