2016-11-19, 23:40:42 +0200, Jouni Malinen wrote: > On Wed, Nov 02, 2016 at 04:38:39PM +0100, Sabrina Dubroca wrote: > > Currently, wpa_supplicant only supports port == 1 in the SCI, but > > users may want to choose a different port. > > > +# macsec_port: IEEE 802.1X/MACsec port > > +# Port component of the SCI > > +# Range: 1-65534 (default: 1) > > Where does this range 1-65534 come from? IEEE Std 802.1X-2010, 12.7 > seems to imply that values 1-65535 should be allow and 65534 Seems you're right. I think I was trying to make sure we don't accidentally get the FF-FF-FF-FF-FF-FF-FF-FF SCI, or I mixed this up with the end of range for port numbers. Do you want me to send a patch, or do you prefer to fix it up directly yourself? > of those > values (i.e., 2-65535) are "virtual ports" while 1 identifies the > "common port". Not exactly. These are all "controlled ports". The "common port" is the lower insecure device for all the controlled ports (with port numbers 1-65535), also shared with the "uncontrolled port". This is all a bit confusing. -- Sabrina _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
