Hi Yaniv, On Sun, Nov 6, 2016 at 9:58 PM, Machani, Yaniv <yanivma@xxxxxx> wrote: > Hi Yegor, > To establish a baseline here, > Can you try using the officially supported packages by TI (Version R8.7) ? > See release notes here : http://software-dl.ti.com/ecs/WiLink8/R8_7/exports/release_notes_R8_7.html > It was validated to work with open and secured modes, based on Kernel 4.4.8 and hostap 2.5+ > Related commits: > Hostap : http://git.ti.com/wilink8-wlan/hostap/commit/2f81a831e29a4d44d6abbac34e3280e8471f61ef > Linux Kernel : http://git.ti.com/wilink8-wlan/wl18xx/commit/13c25bca8d5229c8d5cf5776a13647b020e29588 > The Firmware version you are using is supporting secured mesh, so no issues there. > > You can also have a look in our build guides http://processors.wiki.ti.com/index.php/WL18xx_System_Build_Scripts Thanks. It is working! Btw. can I just use http://git.ti.com/wilink8-wlan/wilink8-wlan-ti-linux-kernel instead of the procedure used above? Are you going to fix 4.9? This kernel is an LTS kernel and will also be used in the upcoming Debian version. Regards, Yegor _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
