From: Benjamin Berg <benjamin.berg@xxxxxxxxxxxxx>
The patch "FT: Allow roaming between APs if IDs match MAC" uses the
assumption that both the R0KH-ID (nas_identifier) and R1KH-ID match the
APs MAC address. This assumption allows communication with an AP without
having prior knowledge about its existance.
To facilitate the setup, default both IDs to be set to the APs own
BSSID instead of forcing the user to set all of the options to the same
value.
Signed-off-by: Benjamin Berg <benjamin.berg@xxxxxxxxxxxxx>
---
src/ap/ap_config.c | 31 +++++++++++++++++++++++--------
1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/src/ap/ap_config.c b/src/ap/ap_config.c
index 228de2b..db7c87c 100644
--- a/src/ap/ap_config.c
+++ b/src/ap/ap_config.c
@@ -803,14 +803,29 @@ static int hostapd_config_check_bss(struct hostapd_bss_config *bss,
}
#ifdef CONFIG_IEEE80211R
- if (full_config && wpa_key_mgmt_ft(bss->wpa_key_mgmt) &&
- (bss->nas_identifier == NULL ||
- os_strlen(bss->nas_identifier) < 1 ||
- os_strlen(bss->nas_identifier) > FT_R0KH_ID_MAX_LEN)) {
- wpa_printf(MSG_ERROR, "FT (IEEE 802.11r) requires "
- "nas_identifier to be configured as a 1..48 octet "
- "string");
- return -1;
+ if (full_config && wpa_key_mgmt_ft(bss->wpa_key_mgmt)) {
+
+ /* Default R0KH-ID (nas_identifier) and R1KH-ID to be equal to
+ * the MAC address of the AP interface if bssid is given and
+ * a generic remote access key is set. */
+ if (bss->ft_remote_trust_khid && is_zero_ether_addr(bss->bssid) != 0) {
+ if (os_strlen(bss->nas_identifier) == 0) {
+ snprintf(bss->nas_identifier, FT_R0KH_ID_MAX_LEN, MACSTR, MAC2STR(bss->bssid));
+ bss->nas_identifier[FT_R0KH_ID_MAX_LEN] = '\0';
+ }
+ if (is_zero_ether_addr(bss->r1_key_holder)) {
+ os_memcpy(bss->r1_key_holder, bss->bssid, FT_R1KH_ID_LEN);
+ }
+ }
+
+ if (bss->nas_identifier == NULL ||
+ os_strlen(bss->nas_identifier) < 1 ||
+ os_strlen(bss->nas_identifier) > FT_R0KH_ID_MAX_LEN) {
+ wpa_printf(MSG_ERROR, "FT (IEEE 802.11r) requires "
+ "nas_identifier to be configured as a 1..48 octet "
+ "string");
+ return -1;
+ }
}
#endif /* CONFIG_IEEE80211R */
--
2.9.3
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
