Forgot to mention: the mib command was issued was during DFS procedure. It may be noticed in the logs. On Thu, Aug 18, 2016 at 7:16 PM, Eduardo Abinader <eduardoabinader@xxxxxxxxx> wrote: > I just reproduced: > > log file: http://pastebin.com/qbpFYWQV > conf: http://pastebin.com/sGYNm2T5 > > On Thu, Aug 18, 2016 at 7:14 PM, Jouni Malinen <j@xxxxx> wrote: >> On Thu, Aug 18, 2016 at 09:57:47AM +0200, Eduardo Abinader wrote: >>> I can provide logs later, but summarizing: >>> >>> 1) compiled with this defconfig: http://pastebin.com/7v5Zh4Ba >>> >>> 2) started a bss with no radius, just normal WPA-PSK >>> >>> 3) sent ctrl_iface mib command >>> >>> result: crash. >> >> There is actually already a hwsim test case that does this with >> WPA-PSK.. In addition, I just tried this with a defconfig build and the >> following hostapd.conf file without being able to reproduce. >> >> interface=wlan0 >> driver=nl80211 >> hw_mode=g >> channel=1 >> ctrl_interface=/var/run/hostapd >> ctrl_interface_group=adm >> ssid=test-psk >> wpa=2 >> wpa_key_mgmt=WPA-PSK >> wpa_pairwise=CCMP >> wpa_passphrase=12345678 >> >> -- >> Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
