Re: How can I tell what capabilities are built in to a wpa_supplicant executable?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2016-08-16 at 12:45 +0000, Blanquicet-Melendez Jose (MM) wrote:
> Hi,
> 
> There is something anologue to this which allows to know the HT and
> VHT capabilties? And also if wpa_supplicant was built using those
> option (CONFIG_IEEE80211N and CONFIG_IEEE80211AC)?.
> It would be really useful on the upper layers in order to know if
> 80211n and 80211ac can be enabled when setting up an AP mode
> operation.

Not yet, but would be pretty trivial to add to interface capabilities
in the D-Bus interface.  Since this is dependent on the driver and
hardware, it should be an interface capability and not a supplicant
global capability (obviously would be disabled if the supplicant wasn't
built with IEEE80211N and AC).

sudo dbus-send --system --print-reply --dest=fi.w1.wpa_supplicant1
/fi/w1/wpa_supplicant1/Interfaces/7
org.freedesktop.DBus.Properties.GetAll
string:"fi.w1.wpa_supplicant1.Interface"

is where that kind of thing should show up if implemented.  Not sure
about the socket-based control interface, but I can't find it in a 20s
look.

Dan


> Regards,
> 
> Jose Blanquicet
> 
> > 
> > -----Original Message-----
> > From: Hostap [mailto:hostap-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf
> > Of Dan
> > Williams
> > Sent: Monday, August 15, 2016 4:47 PM
> > To: Jouni Malinen; chris@xxxxxxxxxxxxxxxxxxx
> > Cc: hostap@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: How can I tell what capabilities are built in to a
> > wpa_supplicant
> > executable?
> > 
> > On Sat, 2016-08-13 at 10:33 +0300, Jouni Malinen wrote:
> > > 
> > > On Mon, Aug 08, 2016 at 12:20:43PM +0100, chris@globaloptimists.o
> > > rg
> > > wrote:
> > > > 
> > > > 
> > > > Is there any way to tell what options have been used to build a
> > > > wpa_supplicant executable?
> > > > 
> > > > In particular I'd like to be able to find out if the
> > > > wpa_supplicant
> > > > provided by the Ubuntu repositories has EAP-SIM capabilities.
> > > The control interface command GET_CAPABILITY allows number of the
> > > capabilities to be determined. For example, "wpa_cli
> > > get_capability
> > > eap"
> > > would list the EAP methods that were included in the build.
> > The D-Bus interface also lists which EAP methods are built in:
> > 
> > dbus-send --system --print-reply --dest=fi.w1.wpa_supplicant1
> > /fi/w1/wpa_supplicant1 org.freedesktop.DBus.Properties.GetAll
> > string:"fi.w1.wpa_supplicant1"
> > 
> > gives you something like:
> > 
> >       dict entry(
> >          string "EapMethods"
> >          variant             array [
> >                string "MD5"
> >                string "TLS"
> >                string "MSCHAPV2"
> >                string "PEAP"
> >                string "TTLS"
> >                string "GTC"
> >                string "OTP"
> >                string "LEAP"
> >                string "AKA"
> >                string "FAST"
> >                string "PAX"
> >                string "SAKE"
> >                string "GPSK"
> >                string "WSC"
> >                string "IKEV2"
> >                string "TNC"
> >             ]
> >       )
> > 
> > Dan
> > 
> > _______________________________________________
> > Hostap mailing list
> > Hostap@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/hostap
> ________________________________
> 
> VISITA IL NOSTRO NUOVO SITO WEB! - VISIT OUR NEW WEB SITE! www.magnet
> imarelli.com
> 
> Confidential Notice: This message - including its attachments - may
> contain proprietary, confidential and/or legally protected
> information and is intended solely for the use of the designated
> addressee(s) above. If you are not the intended recipient be aware
> that any downloading, copying, disclosure, distribution or use of the
> contents of the above information is strictly prohibited.
> If you have received this communication by mistake, please forward
> the message back to the sender at the email address above, delete the
> message from all mailboxes and any other electronic storage medium
> and destroy all copies.
> Disclaimer Notice: Internet communications cannot be guaranteed to be
> safe or error-free. Therefore we do not assure that this message is
> complete or accurate and we do not accept liability for any errors or
> omissions in the contents of this message.
> _______________________________________________
> Hostap mailing list
> Hostap@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/hostap

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap




[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux