On Mon, Jul 11, 2016 at 02:37:58PM +0200, Jörg Krause wrote: > I figured out that wpa_supplicant does not go into AP mode operation > because the network is marked as "disabled". > > This is because of the command "select_network" I switch to the network > I configured before. > > So do I have to run "enable_network 0" (id=0 for sssid AP_MODE) every > time after running "select_network"? "SELECT_NETWORK <network id>" is indeed disabling all other network profiles apart from the select one. You would need to enable the desired other network after this command, e.g., with "ENABLE_NETWORK <id/all>" or "SELECT_NETWORK all". -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
