Hi, I'm currently trying to get a hostapd v2.3 running for WPA-EAP on a Debian unstable (kernel 4.6). I am trying to connect with a Nokia N900 (OS: Linux/Maemo) which unfortunately always results in the lines: wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.1X: authentication failed - EAP type: 0 ((null)) wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.1X: Supplicant used different EAP type: 1 (Identity) On the N900 GUI I have selected the following options: ----- EAP Type: TTLS Certificate: None EAP Methode: EAP-MSCHAPv2 User: testuser Password: testpw ----- On the hostapd side, eap_user.conf looks like this: ----- "testuser" TTLS "testuser" TTLS-MSCHAPV2 "testpw" [2] ----- And hostapd-eap.conf like this: ----- interface=wlan0 driver=nl80211 country_code=DE ssid=testnet ieee80211d=1 hw_mode=g ieee80211n=1 channel=0 disassoc_low_ack=1 wmm_enabled=1 wpa=2 wpa_key_mgmt=WPA-EAP wpa_pairwise=CCMP rsn_pairwise=CCMP ieee8021x=1 eap_server=1 eap_user_file=/etc/hostapd/eap_user ca_cert=/etc/hostapd/ca.crt server_cert=/etc/hostapd/server.pem dh_file=/etc/hostapd/dh2048.pem ----- Finally, the output of hostapd itself is the following: ----- $ hostapd ./hostapd-eap.conf Configuration file: ./hostapd-eap.conf wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE ACS: Automatic channel selection started, this may take a bit wlan0: interface state COUNTRY_UPDATE->ACS wlan0: ACS-STARTED wlan0: ACS-COMPLETED freq=2462 channel=11 Using interface wlan0 with hwaddr 00:1b:b1:f2:f3:e3 and ssid "testnet" wlan0: interface state ACS->ENABLED wlan0: AP-ENABLED wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.11: authenticated wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.11: associated (aid 1) wlan0: CTRL-EVENT-EAP-STARTED 00:0d:d5:8c:7a:97 wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1 wlan0: CTRL-EVENT-EAP-STARTED 00:0d:d5:8c:7a:97 wlan0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1 wlan0: CTRL-EVENT-EAP-FAILURE 00:0d:d5:8c:7a:97 wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.1X: authentication failed - EAP type: 0 ((null)) wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.1X: Supplicant used different EAP type: 1 (Identity) wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.11: authenticated wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.11: associated (aid 1) wlan0: CTRL-EVENT-EAP-STARTED 00:0d:d5:8c:7a:97 wlan0: CTRL-EVENT-EAP-FAILURE 00:0d:d5:8c:7a:97 wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.1X: authentication failed - EAP type: 0 ((null)) wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.1X: Supplicant used different EAP type: 1 (Identity) wlan0: STA 00:0d:d5:8c:7a:97 IEEE 802.11: deauthenticated due to local deauth request ----- Anyone having an idea why the authentication might fail? Regards, Linus PS: The following combinations did not work either, they resulted in the same output and error on the hostapd side: ----- N900: EAP Type: TTLS; EAP Methode: MSCHAPv2 (instead of "EAP-MSCHAPv2") eap_user.conf: phase1 -> TTLS, phase2 -> TTLS-MSCHAPV2 ---- ---- N900: EAP Type: TTLS; EAP Methode: EAP-MSCHAPv2 (or just "MSCHAPv2") eap_user.conf: phase1 -> TTLS, phase2 -> MSCHAPV2 (instead of "TTLS-MSCHAPV2") ---- ---- N900: EAP Type: PEAP; EAP Methode: EAP-MSCHAPv2 eap_user.conf: phase1 -> PEAP, phase2 -> MSCHAPv2 ---- _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
