[PATCH 3/4] mesh: Use WPA_DRIVER_MESH_CONF_FLAG_* as modification flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Masashi Honma <masashi.honma@xxxxxxxxx>
---
 src/drivers/driver.h         |  5 ++++-
 src/drivers/driver_nl80211.c | 15 ++++++++++-----
 wpa_supplicant/mesh.c        |  4 ++--
 3 files changed, 16 insertions(+), 8 deletions(-)

diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 3e59e6e..b0d25f0 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1118,12 +1118,15 @@ struct wpa_driver_ap_params {
 };
 
 struct wpa_driver_mesh_bss_params {
-#define WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS	0x00000001
+#define WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS		0x00000001
+#define WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT	0x00000002
+#define WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS	0x00000004
 	/*
 	 * TODO: Other mesh configuration parameters would go here.
 	 * See NL80211_MESHCONF_* for all the mesh config parameters.
 	 */
 	unsigned int flags;
+	int auto_plinks;
 	int peer_link_timeout;
 	int max_peer_links;
 };
diff --git a/src/drivers/driver_nl80211.c b/src/drivers/driver_nl80211.c
index d9d8c98..7d8330a 100644
--- a/src/drivers/driver_nl80211.c
+++ b/src/drivers/driver_nl80211.c
@@ -8386,12 +8386,13 @@ static int nl80211_put_mesh_config(struct nl_msg *msg,
 	if (!container)
 		return -1;
 
-	if (nla_put_u32(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
-		(params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) ?
-			1 : 0))
+	if ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS) &&
+	    nla_put_u32(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
+			params->auto_plinks))
 		return -1;
 
-	if (nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
+	if ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS) &&
+	    nla_put_u16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
 			params->max_peer_links))
 		return -1;
 
@@ -8399,7 +8400,8 @@ static int nl80211_put_mesh_config(struct nl_msg *msg,
 	 * Set NL80211_MESHCONF_PLINK_TIMEOUT even if user mpm is used because
 	 * the timer could disconnect stations even in that case.
 	 */
-	if (nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
+	if ((params->flags & WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT) &&
+	    nla_put_u32(msg, NL80211_MESHCONF_PLINK_TIMEOUT,
 			params->peer_link_timeout)) {
 		wpa_printf(MSG_ERROR, "nl80211: Failed to set PLINK_TIMEOUT");
 		return -1;
@@ -8454,6 +8456,9 @@ static int nl80211_join_mesh(struct i802_bss *bss,
 		goto fail;
 	nla_nest_end(msg, container);
 
+	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
+	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_PEER_LINK_TIMEOUT;
+	params->conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_MAX_PEER_LINKS;
 	if (nl80211_put_mesh_config(msg, &params->conf) < 0)
 		goto fail;
 
diff --git a/wpa_supplicant/mesh.c b/wpa_supplicant/mesh.c
index 7d42d4a..31a5fdf 100644
--- a/wpa_supplicant/mesh.c
+++ b/wpa_supplicant/mesh.c
@@ -410,10 +410,10 @@ int wpa_supplicant_join_mesh(struct wpa_supplicant *wpa_s,
 
 	if (wpa_s->conf->user_mpm) {
 		params.flags |= WPA_DRIVER_MESH_FLAG_USER_MPM;
-		params.conf.flags &= ~WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
+		params.conf.auto_plinks = 0;
 	} else {
 		params.flags |= WPA_DRIVER_MESH_FLAG_DRIVER_MPM;
-		params.conf.flags |= WPA_DRIVER_MESH_CONF_FLAG_AUTO_PLINKS;
+		params.conf.auto_plinks = 1;
 	}
 	params.conf.peer_link_timeout = wpa_s->conf->mesh_max_inactivity;
 
-- 
2.7.4


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux