Hi, We have successfully been experimenting with wpa_supplicant on various versions of raspberry pies for enterprise Wifi authentication (802.1x). We now plan to sell our stand-alone (no other user interface) raspberry pie devices to customers that would deploy these in their SME offices. We will embed the Raspberry pies with pre-installed certificates and domain information about our server. The network administrator of the SME is required to forward the EAP messages to our server by configuring his/her AP. However, we don't want to (and cannot) standardize the access point name chosen by the SME administrator (the AP would also serve other general purpose network access). Therefore, a method for dynamic AP selection is needed. We plan to use EAP-TLS as the authentication method. As there is no visual or command line interface accessible from raspberry pie, we want it to try and connect with all the APs in its vicinity, automatically. We have thought about different approaches to do this. We found a python script that scans the network https://sourceforge.net/projects/wpascm/ . However, it still asks the user to manually choose the correct AP. We believe that we can modify the script to dynamically select the right AP (and EAP server combination). A similar approach was to use wpa_cli scan list and feed formatted result to wpa_cli to try connecting to different APs. Are there any better ways of doing this? Are we missing something? Thank you. _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
