Hello, We use a monitoring socket ( ATTACH command ) for unsolicited events on Global, p2pdev0 and p2pgrp0 interface on an autonomous GO. Our station interface is not activated. We can receive CTRL-EVENT-BSS-ADDED. On starting p2p connection from an external peer P2P-DEVICE-FOUND, P2P-PROV-DISC-SHOW-PIN events are printed from WPA_supplicant, but these events are never seen on the monitoring socket. I've noticed most of the p2p notification functions in notify.c use dbus functions. Our system does not have dbus interface. Am i missing any configuration to start receiving these events? Regards, Sesh ________________________________ ________________________________ [CONFIDENTIALITY AND PRIVACY NOTICE] Information transmitted by this email is proprietary to Physio-Control and is intended for use only by the individual or entity to which it is addressed, and may contain information that is private, privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination of this information in any manner is strictly prohibited. In such cases, please delete this mail from your records. To view this notice in other languages you can either select the following link or manually copy and paste the link into the address bar of a web browser: http://www.physio-control.com/emaildisclaimer/ ________________________________ ________________________________ _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
