On Wed, Apr 06, 2016 at 05:14:39PM +0300, Ilan Peer wrote: > On association to an HS2.0 network, configure the following filtering > based on the net-sysfs APIs (based on net-next tree). > > 1. Enable gratuitous ARP filtering > 2. Enable unsolicited Neighbor Advertisement filtering > 3. Enable GTK filtering if DGAF disabled bit is zero > > In this version the filter configuration is done early in the > beginning of the connection flow which is not strictly compliant > with the HS 2.0 release 2 specification that requests to configure > the filters only after the IP address is set to avoid possible race > conditions. This can be changed later if needed. Thanks, applied with some fixes (wpa_drv_configure_frame_filters() call from wpa_supplicant_cleanup() resulted in NULL pointer dereference in case interface initialization failed). I've discussed the Hotspot 2.0 specification text and concluded that the correct behavior here is to ignore the part that might imply that IP address needs to be obtained before enabling filtering, so the design in this patch set is fine for that area. -- Jouni Malinen PGP id EFC895FA _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap