> -----Original Message----- > From: Hostap [mailto:hostap-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of > Debabrata Purohit > Sent: Wednesday, April 06, 2016 16:15 > To: hostap@xxxxxxxxxxxxxxxxxxx > Subject: WMM-AC: configuration of PSB bit in TSPEC element > > > Hi > > The WMM-AC control interface does not give an option to configure the PSB > bit in TS Info field in TSPEC element. > It fills the PSB bit by reading the UAPSD field from WMM parameter > element from the Association response frame. > > But the WMM-AC test plan (WMM(r)-Admission Control System > Interoperability Test Plan Version 1.0.6) mandates that - The PSB value > should be "settable" by the control interface for ADDTS request generation. > > Is there a reason to read the PSB value from Association response only. > Should there be a Patch to change the behavior so that Application has > option to configure the PSB bit? I do not think that we had a real reason to enable this configuration at the time this was added, so we simply enabled was supported by the AP. Regards, Ilan. _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap