Re: wpa_cli disassociate

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 31, 2016 at 07:35:06PM +0200, Pas wrote:
> Could someone please provide an example of an "address" as an argument
> to wpa_cli's disassociate? Using the AP's MAC address doesn't work.

It is a _station's_ MAC address.. This command is for AP mode, not for
station mode.

> > disassociate
> Invalid DISASSOCIATE command - at least 1 argument is required.
> <addr> = disassociate a station
> 
> > status
> bssid=c4:27:95:xx:xx:xx
> ...
> 
> > disassociate c4:27:95:xx:xx:xx
> FAIL

That would be a request to disassociate a station connected to the local
device that is acting as an AP. You would use the "disconnect" command
to disconnect the local device, e.g., when associated as a station with
an AP.

-- 
Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux