[PATCH 1/5] tests: Add remote directory to tests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add tests/remote direcotry and files:
config.py - handle devices/setup_params table
run-tests.py - will run tests cases
test_devices.py - run basic configuration tests

You can add own configuration file, by default
this is cfg.py, and put there devices and
setup_params definition in format you can
find in config.py file.
You can use -c option or just create cfg.py file.

Print available devices/test_cases:
./run-tests.py

Check devices (ssh connection, authorized_keys, interfaces):
./run-test.py -t devices

Run sanity tests (test_sanit_*):
./run-test.py -d <dut_name> -t sanity

Run all tests:
./run-tests.py -d <dut_name> -t all

Run test_A and test_B:
./run-tests.py -d <dut_name> -t "test_A, test_B"

Set reference device, and run sanity tests:
./run-tests.py -d <dut_name> -r <ref_name> -t sanity

Multiple duts/refs/monitors could be setup:
eg.
./run-tests.py -d <dut_name> -r <ref1_name> -r <ref2_name> -t sanity

Monitor could be set like this:
./run-tests.py -d <dut_name> -t sanity -m all -m <standalone_monitor>

You can also add filters to tests you would like to run
./run-tests.py -d <dut_name> -t all -k wep -k g_only
./run-tests.py -d <dut_name> -t all -k VHT80

./run-test.py don't start/terminate wpa_supplicant nor hostpad,
test cases are resposible for that, while we don't know test
case requirements.

Restart (-R) trace (-T) and perf (-P) options available.
This request trace/perf logs from the hosts (if possible).

As a parameters each test case get:
- devices - table of available devices
- setup_params
- duts - names of DUTs should be tested
- refs - names of reference devices should be used
- monitors - names of monitors list

Each test could return append_text.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@xxxxxxxxx>
---
 tests/remote/config.py       |  82 +++++++++++++
 tests/remote/run-tests.py    | 286 +++++++++++++++++++++++++++++++++++++++++++
 tests/remote/test_devices.py | 142 +++++++++++++++++++++
 3 files changed, 510 insertions(+)
 create mode 100644 tests/remote/config.py
 create mode 100755 tests/remote/run-tests.py
 create mode 100644 tests/remote/test_devices.py

diff --git a/tests/remote/config.py b/tests/remote/config.py
new file mode 100644
index 0000000..89de0fe
--- /dev/null
+++ b/tests/remote/config.py
@@ -0,0 +1,82 @@
+#
+# Environtment configuration
+# Copyright (c) 2016, Tieto Corporation
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+
+#
+# Currently static definition, in the future this could be config file,
+# or even common database with host management.
+#
+
+import logging
+logger = logging.getLogger()
+
+#
+# You can put your settings in cfg.py file with setup_params, devices definitions
+# in the format as below. In other case HWSIM cfg will be used.
+#
+setup_params = {"setup_hw" : "./tests/setup_hw.sh",
+                "hostapd" : "./tests/hostapd",
+                "wpa_supplicant" : "./tests/wpa_supplicant",
+                "iperf" : "iperf",
+                "country" : "US",
+                "log_dir" : "/tmp/",
+                "ipv4_test_net" : "192.168.12.0",
+                "trace_start" : "./tests/trace_start.sh",
+                "trace_stop" : "./tests/trace_stop.sh",
+                "perf_start" : "./tests/perf_start.sh",
+                "perf_stop" : "./tests/perf_stop.sh"}
+
+#
+#devices = [{"hostname": "192.168.254.58", "ifname" : "wlan0", "port": "9877", "name" : "t2-ath9k", "flags" : "AP_HT40 STA_HT40"},
+#           {"hostname": "192.168.254.58", "ifname" : "wlan1", "port": "9877", "name" : "t2-ath10k", "flags" : "AP_VHT80"},
+#           {"hostname": "192.168.254.58", "ifname" : "wlan3", "port": "9877", "name" : "t2-intel7260", "flags" : "STA_VHT80"},
+#           {"hostname": "192.168.254.50", "ifname" : "wlan0", "port": "9877", "name" : "t1-ath9k"},
+#           {"hostname": "192.168.254.50", "ifname" : "wlan1", "port": "9877", "name" : "t1-ath10k"}]
+
+#
+# HWSIM - ifaces available after modprobe mac80211_hwsim
+#
+devices = [{"hostname": "localhost", "ifname": "wlan0", "port": "9868", "name": "hwsim0", "flags": "AP_VHT80 STA_VHT80"},
+           {"hostname": "localhost", "ifname": "wlan1", "port": "9878", "name": "hwsim1", "flags": "AP_VHT80 STA_VHT80"},
+           {"hostname": "localhost", "ifname": "wlan2", "port": "9888", "name": "hwsim2", "flags": "AP_VHT80 STA_VHT80"},
+           {"hostname": "localhost", "ifname": "wlan3", "port": "9898", "name": "hwsim3", "flags": "AP_VHT80 STA_VHT80"}]
+
+
+def get_setup_params(filename="cfg.py"):
+    try:
+       mod = __import__(filename.split(".")[0])
+       return mod.setup_params
+    except:
+       logger.debug("__import__(" + filename + ") failed, using static settings")
+       pass
+    return setup_params
+
+def get_devices(filename="cfg.py"):
+    try:
+       mod = __import__(filename.split(".")[0])
+       return mod.devices
+    except:
+       logger.debug("__import__(" + filename + ") failed, using static settings")
+       pass
+    return devices
+
+def get_device(devices, name=None, flags=None, lock=False):
+    if name is None and flags is None:
+        raise Exception("Failed to get device")
+    for device in devices:
+        if device['name'] == name:
+            return device
+    for device in devices:
+        try:
+            device_flags = device['flags']
+            if device_flags.find(flags) != -1:
+                return device
+        except:
+            pass
+    raise Exception("Failed to get device " + name)
+
+def put_device(devices, name):
+    pass
diff --git a/tests/remote/run-tests.py b/tests/remote/run-tests.py
new file mode 100755
index 0000000..33ac8e6
--- /dev/null
+++ b/tests/remote/run-tests.py
@@ -0,0 +1,286 @@
+#!/usr/bin/python
+#
+# Remote test case executor
+# Copyright (c) 2016, Tieto Corporation
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+import os
+import re
+import sys
+import time
+import traceback
+import getopt
+from datetime import datetime
+
+import logging
+logger = logging.getLogger()
+
+scriptsdir = os.path.dirname(os.path.realpath(sys.modules[__name__].__file__))
+sys.path.append(os.path.join(scriptsdir, '..', '..', 'wpaspy'))
+sys.path.append(os.path.join(scriptsdir, '..', 'hwsim'))
+
+import wpaspy
+import config
+from test_devices import show_devices
+from test_devices import check_devices
+
+def usage():
+    print "USAGE: " + sys.argv[0] + " -t devices"
+    print "USAGE: " + sys.argv[0] + " -t check_devices"
+    print "USAGE: " + sys.argv[0] + " -d <dut_name> -t <all|sanity|tests_to_run> [-r <ref_name>] [-c <cfg_file.py>] [-m <all|monitor_name>] [-R][-T][-P][-v]"
+    print "USAGE: " + sys.argv[0]
+
+def get_devices(devices, duts, refs, monitors):
+    for dut in duts:
+        config.get_device(devices, dut, lock=True)
+    for ref in refs:
+        config.get_device(devices, ref, lock=True)
+    for monitor in monitors:
+        if monitor == "all":
+            continue
+        if monitor in duts:
+            continue
+        if monitor in refs:
+            continue
+        config.get_device(devices, monitor, lock=True)
+
+def put_devices(devices, duts, refs, monitors):
+    for dut in duts:
+        config.put_device(devices, dut)
+    for ref in refs:
+        config.put_device(devices, ref)
+    for monitor in monitors:
+        if monitor == "all":
+            continue
+        if monitor in duts:
+            continue
+        if monitor in refs:
+            continue
+        config.put_device(devices, monitor)
+
+def main():
+    duts = []
+    refs = []
+    monitors = []
+    filter_keys = []
+    requested_tests = ["help"]
+    cfg_file = "cfg.py"
+    log_dir = "./logs/"
+    verbose = False
+    trace = False
+    restart = False
+    perf = False
+
+    # parse input parameters
+    try:
+        opts, args = getopt.getopt(sys.argv[1:], "d:r:t:l:k:c:m:vRPT",
+                                   ["dut=", "ref=", "tests=", "log-dir=", "cfg=", "key=", "monitor="])
+    except getopt.GetoptError as err:
+        print(err)
+        usage()
+        sys.exit(2)
+
+    for option, argument in opts:
+        if option == "-v":
+            verbose = True
+        elif option == "-R":
+            restart = True
+        elif option == "-T":
+            trace = True
+        elif option == "-P":
+            perf = True
+        elif option in ("-d", "--dut"):
+            duts.append(argument)
+        elif option in ("-r", "--ref"):
+            refs.append(argument)
+        elif option in ("-t", "--tests"):
+            requested_tests = re.split('; | |, ', argument)
+        elif option in ("-l", "--log-dir"):
+            log_dir = argument
+        elif option in ("-k", "--key"):
+            filter_keys.append(argument)
+        elif option in ("-m", "--monitor"):
+            monitors.append(argument)
+        elif option in ("-c", "--cfg"):
+            cfg_file = argument
+        else:
+            assert False, "unhandled option"
+
+    # get env configuration
+    setup_params = config.get_setup_params(cfg_file)
+    devices = config.get_devices(cfg_file)
+
+    # put logs in log_dir
+    symlink = os.path.join(log_dir, "current");
+    if os.path.exists(symlink):
+        os.unlink(symlink)
+    log_dir = os.path.join(log_dir, time.strftime("%Y_%m_%d_%H_%M_%S"))
+    if not os.path.exists(log_dir):
+        os.makedirs(log_dir)
+    os.symlink(os.path.join("../", log_dir), symlink)
+
+    # setup restart/trace/perf request
+    setup_params['local_log_dir'] = log_dir
+    setup_params['restart_device'] = restart
+    setup_params['trace'] = trace
+    setup_params['perf'] = perf
+
+    # configure logger
+    logger.setLevel(logging.DEBUG)
+
+    stdout_handler = logging.StreamHandler()
+    stdout_handler.setLevel(logging.WARNING)
+    if verbose:
+        stdout_handler.setLevel(logging.DEBUG)
+    logger.addHandler(stdout_handler)
+
+    formatter = logging.Formatter('%(asctime)s - %(message)s')
+    file_name = os.path.join(log_dir, 'run-tests.log')
+    log_handler = logging.FileHandler(file_name)
+    log_handler.setLevel(logging.DEBUG)
+    log_handler.setFormatter(formatter)
+    logger.addHandler(log_handler)
+
+    # import available tests
+    tests = []
+    failed = []
+    test_modules = []
+    files = os.listdir(scriptsdir)
+    for t in files:
+        m = re.match(r'(test_.*)\.py$', t)
+        if m:
+            mod = __import__(m.group(1))
+            test_modules.append(mod.__name__.replace('test_', '', 1))
+            for key,val in mod.__dict__.iteritems():
+                if key.startswith("test_"):
+                    tests.append(val)
+    test_names = list(set([t.__name__.replace('test_', '', 1) for t in tests]))
+
+    # sort the list
+    test_names.sort()
+    tests.sort()
+
+    # print help
+    if requested_tests[0] == "help":
+        usage()
+        print "\nAvailable Devices:"
+        for device in devices:
+            print "\t", device['name']
+        print "\nAvailable tests:"
+        for test in test_names:
+            print "\t", test
+        return
+
+    # show/check devices
+    if requested_tests[0] == "devices":
+        show_devices(devices, setup_params)
+        return
+
+    # apply filters
+    for filter_key in filter_keys:
+        filtered_tests = []
+        for test in tests:
+            if re.search(filter_key, test.__name__):
+                filtered_tests.append(test)
+        tests = filtered_tests
+
+    # setup test we should run
+    tests_to_run = []
+    if requested_tests[0] == "all":
+        tests_to_run = tests
+    elif requested_tests[0] == "sanity":
+        for test in tests:
+            if test.__name__.startswith("test_sanity_"):
+                tests_to_run.append(test)
+    else:
+        for test in requested_tests:
+            t = None
+            for tt in tests:
+                name = tt.__name__.replace('test_', '', 1)
+                if name == test:
+                    t = tt
+                    break
+            if not t:
+                logger.warning("test case: " + test + " NOT-FOUND")
+                continue
+            tests_to_run.append(t)
+
+    # lock devices
+    try:
+        get_devices(devices, duts, refs, monitors)
+    except Exception, e:
+        logger.warning("get devices failed: " + str(e))
+        logger.info(traceback.format_exc())
+        put_devices(devices, duts, refs, monitors)
+        return
+    except:
+        logger.warning("get devices failed")
+        logger.info(traceback.format_exc())
+        put_devices(devices, duts, refs, monitors)
+        return
+
+    # now run test cases
+    for dut in duts:
+        logger.warning("DUT: " + str(dut))
+    for ref in refs:
+        logger.warning("REF: " + str(ref))
+    for monitor in monitors:
+        logger.warning("MON: " + str(monitor))
+
+    # run check_devices at begining
+    logger.warning("RUN check_devices")
+    try:
+        check_devices(devices, setup_params, refs, duts, monitors)
+    except Exception, e:
+        logger.warning("FAILED: " + str(e))
+        logger.info(traceback.format_exc())
+        put_devices(devices, duts, refs, monitors)
+        return
+    except:
+        logger.warning("FAILED")
+        logger.info(traceback.format_exc())
+        put_devices(devices, duts, refs, monitors)
+        return
+    logger.warning("PASS")
+
+    test_no = 1
+    for test in tests_to_run:
+        try:
+            start = datetime.now()
+            setup_params['tc_name'] = test.__name__.replace('test_', '', 1)
+            logger.warning("START - " + setup_params['tc_name'] + " (" + str(test_no) + "/" + str(len(tests_to_run)) + ")")
+            if test.__doc__:
+                logger.info("Test: " + test.__doc__)
+
+            # run tc
+            res = test(devices, setup_params, refs, duts, monitors)
+
+            end = datetime.now()
+            logger.warning("PASS (" + res + ") - " + str((end - start).total_seconds()) + "s")
+        except KeyboardInterrupt:
+            put_devices(devices, duts, refs, monitors)
+            raise
+        except Exception, e:
+            end = datetime.now()
+            logger.warning("FAILED (" + str(e) + ") - " + str((end - start).total_seconds()) + "s")
+            logger.info(traceback.format_exc())
+            failed.append(test.__name__.replace('test_', '', 1))
+        except:
+            end = datetime.now()
+            logger.warning("FAILED - " + str((end - start).total_seconds()) + "s")
+            logger.info(traceback.format_exc())
+            failed.append(test.__name__.replace('test_', '', 1))
+        test_no = test_no + 1
+
+    # unlock devices
+    put_devices(devices, duts, refs, monitors)
+
+    if len(failed) > 0:
+        logger.warning("Failed test cases:")
+        for test in failed:
+            logger.warning("\t" + test)
+
+
+if __name__ == "__main__":
+        main()
diff --git a/tests/remote/test_devices.py b/tests/remote/test_devices.py
new file mode 100644
index 0000000..4a22d42
--- /dev/null
+++ b/tests/remote/test_devices.py
@@ -0,0 +1,142 @@
+#!/usr/bin/env python
+#
+# Show/check devices
+# Copyright (c) 2016, Tieto Corporation
+#
+# This software may be distributed under the terms of the BSD license.
+# See README for more details.
+import time
+import traceback
+import config
+import os
+import sys
+import getopt
+import re
+
+import logging
+logger = logging.getLogger()
+
+import utils
+from remotehost import Host
+from wpasupplicant import WpaSupplicant
+import hostapd
+
+def show_devices(devices, setup_params):
+    """Show/check available devices"""
+    print "Devices:"
+    for device in devices:
+        dev = config.get_device(devices, device['name'])
+        host = Host(host = dev['hostname'], ifname = dev['ifname'],
+                    port = dev['port'], name = dev['name'])
+        # simple check if authorized_keys works correctly
+        status, buf = host.execute("id")
+        if status != 0:
+            print "[" + host.name + "] - ssh communication:  FAILED"
+            continue
+        else:
+            print "[" + host.name + "] - ssh communication: OK"
+        # check setup_hw works correctly
+        try:
+            setup_hw = setup_params['setup_hw']
+            try:
+                restart_device = setup_params['restart_device']
+            except:
+                restart_device = "0"
+            host.execute(setup_hw + " -I " + host.ifname + " -R " + restart_device)
+        except:
+            pass
+        # show uname
+        status, buf = host.execute("uname -s -n -r -m -o")
+        print "\t" + buf
+        # show ifconfig
+        status, buf = host.execute("ifconfig " + host.ifname)
+        if status != 0:
+            print "\t" + host.ifname + " failed\n"
+            continue
+        lines = buf.splitlines()
+        for line in lines:
+            print "\t" + line
+        # check hostapd, wpa_supplicant, iperf exist
+        status, buf = host.execute(setup_params['wpa_supplicant'] + " -v")
+        if status != 0:
+            print "\t" + setup_params['wpa_supplicant'] + " not find\n"
+            continue
+        lines = buf.splitlines()
+        for line in lines:
+            print "\t" + line
+        print ""
+        status, buf = host.execute(setup_params['hostapd'] + " -v")
+        if status != 1:
+            print "\t" + setup_params['hostapd'] + " not find\n"
+            continue
+        lines = buf.splitlines()
+        for line in lines:
+            print "\t" + line
+        print ""
+        status, buf = host.execute(setup_params['iperf'] + " -v")
+        if status != 0 and status != 1:
+            print "\t" + setup_params['iperf'] + " not find\n"
+            continue
+        lines = buf.splitlines()
+        for line in lines:
+            print "\t" + line
+        print ""
+
+def check_device(devices, setup_params, dev_name, monitor=False):
+    dev = config.get_device(devices, dev_name)
+    host = Host(host = dev['hostname'], ifname = dev['ifname'],
+                port = dev['port'], name = dev['name'])
+    # simple check if authorized_keys works correctly
+    status, buf = host.execute("id")
+    if status != 0:
+        raise Exception(dev_name + " - ssh communitcation FAILED: " + buf)
+
+    ifaces = re.split('; | |, ', host.ifname)
+    # try to setup host/ifaces
+    for iface in ifaces:
+        try:
+            setup_hw = setup_params['setup_hw']
+            try:
+                restart_device = setup_params['restart_device']
+            except:
+                restart_device = "0"
+            host.execute(setup_hw + " -I " + iface + " -R " + restart_device)
+        except:
+            pass
+
+    # check interfaces (multi for monitor)
+    for iface in ifaces:
+        status, buf = host.execute("ifconfig " + iface)
+        if status != 0:
+            raise Exception(dev_name + " ifconfig " + iface + " failed: " + buf)
+
+    # monitor don't need wpa_supplicant/hostapd ...
+    if monitor == True:
+        return
+
+    status, buf = host.execute("ls -l " + setup_params['wpa_supplicant'])
+    if status != 0:
+        raise Exception(dev_name + " - wpa_supplicant: " + buf)
+
+    status, buf = host.execute("ls -l " + setup_params['hostapd'])
+    if status != 0:
+        raise Exception(dev_name + " - hostapd: " + buf)
+
+    status, buf = host.execute("which " + setup_params['iperf'])
+    if status != 0:
+        raise Exception(dev_name + " - hostapd: " + buf)
+
+    status, buf = host.execute("which tshark")
+    if status != 0:
+        logger.debug(dev_name + " - hostapd: " + buf)
+
+def check_devices(devices, setup_params, refs, duts, monitors):
+    """Check duts/refs/monitors devices"""
+    for dut in duts:
+        check_device(devices, setup_params, dut)
+    for ref in refs:
+        check_device(devices, setup_params, ref)
+    for monitor in monitors:
+        if monitor == "all":
+            continue
+        check_device(devices, setup_params, monitor, monitor=True)
-- 
1.9.1


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux